Active Member
|
[China]
Address: No. 2 Xiuyan Road, Hangzhou City, Zhejiang Province
Contact name:Robert Wang
Hangzhou Haina Environmental Protection Tech Co., Ltd. |
|
Membrane Filter 2540-LP for Industrial & Commercial RO Water Purifier System
Specification
| Model Number | Description | 2540-LP |
| Performance & Test Condition | The Desalination Rate % | 99.5% |
| Water Rate GDP | 750GPD | |
| The Test pressure | 100si | |
| Test solution Temperature | 25± 1ºC | |
| Test Solution Concentration NaCl | 1500PPM | |
| Recovery Of Single-Branch Membrane Element | 15% | |
| Feed water SDI | 5 |
Operating Limit:
| Maximum Operating Temperature | 113ºF(45ºC) |
| Maximum Working Pressure | 600psi(41.0 bar) |
| The high pressure drop | 15psi (1.0bar) |
| Continuously operating PH range a | 3-10 |
| Short wash PH range (30min) b | 2-12 |
| Maximum feed water SDI | SDI 5 |
| Tolerance Of Free Chlorine | <0.1ppm |
| Maximum pressure drop for single membrane element | 15psi(0.1Mpa) |
An Industrial RO System continues to filter water till the tank is full so shuts off. Once you switch on your drinkable regulator, water comes out of the tank through another post-filter to shine drinkable before it gets to your regulator.
Reverse osmosis plants require a variety of pre-treatment techniques including softening, dechlorination, and anti-scalent treatment. Following pre-treatment, high levels of pressure send water through a semi-permeable membrane, which retains all contaminants but lets pure water pass through. Energy requirements depend on the concentration of salts and contaminants in the influent water, higher concentrations requires more energy to treat.
DIMENSION
2540:A:1016mm B:60.6mm C:19mm D:33mm
We have over 20 years experiences in RO/UF water treatment and famous in China specially in Asia.
1.We specialized in RO membrane over 18 years,focus on offering good service.
2.Over 18 years experience in the RO products,auto-matic production line
3.OEM and ODM order accepted.
4.Strict QC process to make sure each membrane with
good quality, will be tested before shipment.
5.Various combination meet all the customized need
6.A good team with technical department, production department,sales department and after sales service department.
FAQ:
Q: How to pay?
A: TT and L/C are acceptable and TT will be more appreciated. 30%
deposit before producing, 70% balanced against the copy of B/L.
Q: What is the delivery time?
A: Usually within 15days. Also depends on order quantities.
Q: Can the package be customized by our own logo ?
A: Yes, the package can be customized your logo, but the MOQ will
be higher for which we can discuss as per the specific orders.
Q: How to install after the products arriving destination?
A: We will provide detailed illustrations to you. And we can also
provide guide to your workers how to use it and how to maintain
it.
Q:What's the certification do you have?
A: We have NSF, ISO9001, OHSAS18001, ISO14001 Certifications.
