Active Member
|
[China]
Address: No. 2 Xiuyan Road, Hangzhou City, Zhejiang Province
Contact name:Robert Wang
Hangzhou Haina Environmental Protection Tech Co., Ltd. |
|
700GPD High Flow with 50% High Recovery Rate RO Membrane for Water Spare Parts
How long will an RO unit last? Virtually forever if you service it regularly and replace parts that wear out, like the storage tank and the faucet. Typical membrane life is about 2 to 5 years, depending on the nature of the water that it's processing.
Two common types of household RO membranes are the Thin Film Composite (TFC or TFM) membrane and the Cellulose Triacetate (CTA) membrane. The main differences between the two types are filtration ability and chlorine tolerance.
Performance and test conditions
| Model | Average Permeate Flow GPD(m³/) | Stable Desalination Rate % |
| BW-3013-700 | 700(2.65) | 95 |
Note: Single membrane permeate flow change in the range of ±15%
Test Conditions
Test Pressure 100psi( 0.7Mpa)
Temperature 25ºC
Concentration of Testing Solution (NaCl) 500ppm
Testing Solution PH 2-11
Note:1. The Max. continous operation temperature is 35ºC when PH
rate over 10.
2. In certain conditions,if would cause membrane breakage if the free chlorine or the other oxidant in feedwater.The production quality guarantee range is notincluded membrane breakage by oxiadation.
Dimension of Membrane Element
3013-700: A:12.0inch B:3.0inch C:0.68inch D:0.75inch E:10inch
HN-JCM brand membrane element produced by world advanced membrane technology and fully automatic production equipment. It can operation under the extra low pressure. Our membrane suitable for household water purifiers, hospitals, laboratory pure water, treatment municipal tap water, well water and other low salinity water sources.
FAQ:
