Active Member
|
[China]
Address: G/F, Complex Bluding, Hesheng Industrial Park, Hebei Village, Dalang South Road, Longhua,
Contact name:Nicole
Shenzhen Melasta Battery Company Ltd |
|
|
| MELASTA Lithium Ion polymer Battery Pack:25.9V 12Ah (310.8Wh, 12A rate) with PCM for e-bike | |
| Package | MELASTA Polymer Li-ion Battery Pack: 25.9V 12Ah (310.8Wh, 12A rate) with PCM |
| Output voltage | 25.9 working voltage, peak voltage @29.4, 21.0V cut-off |
| Battery Capacity | 12Ah (310.8 Wh) |
| Cycle life | > 500 cycles (80% of initial capacity @ 0.2C rate, IEC Standard) |
| Protection | One PCM (30A limited) installed with the battery pack and protects the battery from |
| Overcharge (> 29.4 V) | |
| Over discharge (<21.0V) | |
| Over drain ( >40 Amps) | |
| Short circuits | |
| Must wait min of 30 minutes after battery is fully charged to allow the PCM to perform balance function on all the cells within the pack. | |
| Prewired | 200mm long 16AWG open end wire |
| Red = Positive | |
| Black = Negative | |
| Charging rate | 6 A Max |
| Max. Discharging Rate | 12A continuous limited by PCM |
| 36A < 30 seconds limited by PCM | |
| Charging temperature: | 0 to 45 degrees Celsius |
| Discharge temperature: | -20 to 60 degrees Celsius |
| Storage temperature: | -20 to 40 degrees Celsius |
| Max Dimensions (LxWxH) | 270 mmx 100mm x 50mm |
| Weight | approx.2200 grams |
| Smart Tips | Please use MELASTA charger below for fully recharge battery pack. |
| Smart Charger (2.8A) for 25.9V Polymer Li-ion Battery Pack, 110-240V --- CE and RoHS listed | |
| Applications | Replace 24V NiMH battery with higher energy and less weight |
| Warning | Please negotiate with MELASTA technicians to learn more Knowledge on LiPO battery . |
