High-quality all-steel body Efficient refrigeration system Large
screen LCD display High Speed Refrigerated Centrifuge
High Speed Refrigerated Centrifuge Features
1. High speed refrigerated centrifuge outstanding
performance:
— CPU precise controlling, high performance brushless DC
motor, maintenance free.
— Highly accurate speed control.
— Timing begins after speed steady to guarantee a more
precise centrifuge time.
— Two kinds of acceleration curves, three kinds of
deceleration curves, free match and combinations between
acceleration and deceleration, makes the specimen separation
better.
2. High speed refrigerated centrifuge reliable safety:
— Full 304 stainless steel made rotor chamber guarantees much
more safety for the rotor running.
— Closed centrifuge chamber can much reduce biological
contamination risk.
— Aluminum material rotor ensures long service life.
— Four important safety functions: Lid interlock, monitor for
lid open / close condition, over-speed protection, automatic
internal diagnosis, which can highly protect operation staff and
the centrifuge.
3. High speed refrigerated centrifuge humanized design:
— Time and speed display simultaneously, convenient for
monitoring the running condition of the centrifuge.
— Three kinds of operating mode: 10s-99min 59s timing,
continuous run and short run.
— G-force (RCF) and speed (RPM) switch displayed, convenient
for reading.
— 10 groups operating parameter memory makes the working
efficiency highly improved.
— Quiet running with noise lower than 65dB.
Max RCF | 12290×g |
Max Capacity | 12000r/min |
Max Speed | 12000r/min |
Timer Range | 1min-99h59min,with continuous run function |
Control and drive system | Large torque AC variable frequency motor, microcomputer control |
Temp control range | -20℃~40℃ |
Noise level | ≤60dB(A) |
Power supply | AC220V 50Hz |
1. Pay attention to the preparation work before using High speed
refrigerated centrifuge
Before using the high-speed centrifuge, you must first check
whether the knobs on the panel are in the specified position, that
is, the power is in the off position, and the potentiometer and
timer are in the zero position. High-speed centrifuge manufacturers
remind you to place an equal amount of samples in each test tube,
and then put them in the rotor symmetrically, so as to avoid
asymmetrical placement due to uneven weight and cause the whole
machine to vibrate during operation.
2. Pay attention to the operation according to the specification
During the operation, first put the test tube into the high-speed
centrifuge and pay attention to tighten the screw and cover the
plexiglass cover, then plug in the plug and turn on the power and
then turn on the power switch. Hot-selling high-speed centrifuge
manufacturers remind you that you should use the timing knob to
select the required time and speed according to your needs. At the
same time, you must turn the speed control knob to zero after
completing this step, and then take out the test tube for analysis
after stopping.
