Active Member
|
[China]
Address: Room 309, Huineng Building, 38 Huaneng Road
Contact name:yisean
Shandong Haiying Wuzhou Instrument Co., Ltd. |
|
|
Interlocking Device And Body Safety Protection Automatic Autoclave Sterilizer
Automatic Autoclave Sterilizer Safety Performance :
◆ Leakage, over-current, and short-circuit protection device: When the heating tube or other parts have leakage, or over-current or short-circuit phenomenon occurs, the system will automatically cut off the power immediately to prevent damage to users.
◆ Double protection against water shortage and independent dry-heating protection: equipped with a low water level sensor and independent dry-heating protection device, which can monitor the water level in the sterilization chamber in real time to prevent dry-burning and prevent misjudgment; if the low-water level sensor fails, it prevents overheating and dry-burning The system will automatically start, immediately cut off the power to protect the heating ring and automatically alarm to ensure safety and reliability.
◆ Double pressure protection: Equipped with mechanical safety valve and electronic overpressure protection system, once the pressure is abnormal, the pressure can be relieved and the power will be cut off and alarm.
◆ Background security test: the system security and safety protection measures can be tested regularly.
◆ Overvoltage test: Regularly check whether the instrument can automatically cut off the power for protection or safety during the overvoltage protection system
| model | CT90 Dry sterilizer | ||
| capacity | 90 liter | ||
| Dimensions (length × width × height) | 660mm×640mm×1000mm | ||
| Sterilization chamber size (diameter × height) | Ф400mm×730mm | ||
| rated power | 3400W | ||
| Rated voltage | 220V±10%50Hz | ||
| Temperature display accuracy | 0.1℃ | ||
| working environment | 5℃～40℃,Relative humidity 10%～85% | ||
| Sterilization chamber material | SUS304 stainless steel | ||
| Sterilization working temperature | 105℃～138℃ | ||
| Sterilization time preset range | 1 minute～6000 minutes | ||
| Preset range of melting temperature | 60℃～100℃ | ||
| Preset range of melting time | 1 minute～6000 minutes | ||
| Preset range of holding temperature | 45℃～60℃ | ||
| Preset range of holding time | 1 minute～9999 minutes | ||
| Cooling lock opening temperature range | solid,agar and waste models 40℃～99℃,Liquid mode 40℃～80℃ | ||
| Exhaust temperature preset range | 73℃—104℃ | ||
| Preset range of door opening temperature | solid,agar and waste models 40℃～99℃,Liquid mode 40℃～80℃ | ||
Automatic Autoclave Sterilizer Sterilization mode :
◆ Solid mode: heating → sterilization → exhaust, air cooling
◆ Solid belt drying mode: heating → sterilization → drainage, exhaust → drying
◆ Liquid mode: heating → sterilization → pre-cooling → exhaust
◆ Liquid belt insulation mode: heating → sterilization → pre-cooling → exhaust → heat preservation
◆ Waste mode: heating → sterilization → exhaust, air cooling
◆ Agar mode: heating → melting → heat preservation
Automatic Autoclave Sterilizer Other optional accessories
◆ Printer: Real-time printing of sterilization temperature, pressure, time and other status data to monitor the sterilization status.
◆ Automatic drying (only available for CT-C model, CT-A model can be purchased): After sterilization, it will automatically dry and dry thoroughly to achieve the CE effect.
◆ Air filtration (only available for drying models): 0.2μm air filter is provided. After the sterilization is completed, the outside air enters the cavity after filtration, which can achieve rapid drying under aseptic conditions.
◆ Automatic water intake (only available for CT-B and CT-C models): The water tank can automatically replenish water to the cavity to avoid the inconvenience of frequent water filling. At the same time, it is equipped with a water level sensor, which automatically stops and alarms when water is lacking.
◆ 3Q/4Q verification service: verification cases of many well-known domestic pharmaceutical companiescosmetics companies.
