Active Member
|
[China]
Address: Room 309, Huineng Building, 38 Huaneng Road
Contact name:yisean
Shandong Haiying Wuzhou Instrument Co., Ltd. |
|
|
Leakage Over Current Short Circuit Protection Device Automatic Autoclave Sterilizer
Automatic Autoclave Sterilizer main feature:
◆ Built-in independent steam generator
◆ Effective sterilization volume: 65 liters or more, suitable for large-capacity sterilization needs of enterprises
◆ Standard independent sample temperature probe
◆ Anti-corrosion 304 stainless steel housing and cavity structure
◆ Possess certification ports and international safety standard documents
◆ One-key query function: you can query the current time, the total number of sterilizations, the time of failure and the code.
◆ Door opening temperature: Each program can set the door opening temperature of the cooling lock according to the thermal inertia of the sterilized material to prevent users from opening the lid of the sterilized material (especially liquid sterilized material) and causing burns when it is still in an unsafe state.
| model | CT90 Dry sterilizer | ||
| capacity | 90 liter | ||
| Timer preset range | Query current time (year,Month,Day,Time,Minute) | ||
| Total number of sterilization and failure time and code | |||
| Pressure gauge display range | 0～0.6Mpa | ||
| pressure | The cavity design pressure is 0.4MPa. | ||
| The corresponding number of each product has the original product quality certificate of the manufacturer and the original certificate issued by the special equipment manufacturing supervision and inspection department | |||
| Pressure safety protection | Two independent pipeline measurement control,Mechanical and electronic dual pressure protection | ||
| Sterilization mode | Solid mode: heating → sterilization → exhaust, air cooling | ||
| Solid belt drying mode: heating → sterilization → drainage, exhaust → drying | |||
| Liquid mode: heating → sterilization → pre-cooling → exhaust | |||
| Liquid belt insulation mode: heating → sterilization → pre-cooling → exhaust → heat preservation | |||
| Waste mode: heating → sterilization → exhaust, air cooling | |||
| Agar mode: heating → melting → heat preservation | |||
| Exhaust steam control and water tank | Fully automatic internal discharge (see instructions for exhaust temperature setting), built-in large-capacity steam condensate collection bottle and water storage tank | ||
| Equipped with automatic water inlet function | The water in the steam collection bottle can be recycled to avoid the inconvenience of frequent water addition. At the same time, it is equipped with a high and low water level sensor. The system automatically detects the supplementary sterilization water to the standard water level before each operation. | ||
| Equipped with drying function | Equipped with a drying module, the appliance is dried after sterilization, the effect is thorough, and it reaches the CE standard. | ||
| Equipped with fan and air intake filter | After the sterilization is completed, without opening the cover, the air is filtered by the filter and then blown by the air intake pump. With the drying module, drying can be achieved in a sterile state. | ||
| Opening method and interlocking device | Unique eight-post interlocking device, flip-type switch cover, touch-switch handle. | ||
| Controller and memory storage function | Using microcomputer intelligent control system. 6 inherent operating modes, 82 modifiable modes, a total of 88 memory and storage programs | ||
| safety equipment | Door lock interlocking device; closed lid inspection; dry-burning protection; water level sensor monitoring; electronic overpressure protection; mechanical safety valve; | ||
| Over-temperature and heating protection; over-current and short-circuit protection; leakage protection; cooling lock; safety protection against scalding; automatic fault detection system | |||
| annex | Condensate collection bottle, water barrier, drain hose, stainless steel basket | ||
| Optional accessories | Printer, cooling fan, item temperature sensor, U disk output | ||
Automatic Autoclave Sterilizer Safety Performance :
◆ Humanized appearance design: the cavity cover and table top are made of thermal insulation material covered with resin insulation layer, which is both anti-scalding and beautiful; the upwardly opening flip-type cavity door saves more space; rounded corner design to avoid bumps; special design The steam discharge and collection system avoids the danger of steam scalding, and the operation is more convenient.
◆ Interlocking device and body safety protection: The specially designed safety interlocking device is more sensitive and safer. If there is pressure or low-pressure steam in the sterilization chamber, the chamber cover cannot be opened; the chamber cover can be opened only when the pressure of the pressure gauge drops to the "0" Mpa position. If the chamber cover is not locked in place, the sterilizer cannot start heating. Overall, the whole machine is more secure.
◆ Double protection against water shortage and independent dry-heating protection: equipped with a low water level sensor and independent dry-heating protection device, which can monitor the water level in the sterilization chamber in real time to prevent dry-burning and prevent misjudgment; if the low-water level sensor fails, it prevents overheating and dry-burning The system will automatically start, immediately cut off the power to protect the heating ring and automatically alarm to ensure safety and reliability.
◆ Double pressure protection: Equipped with mechanical safety valve and electronic overpressure protection system, once the pressure is abnormal, the pressure can be relieved and the power will be cut off and alarm.
◆ Background security test: the system security and safety protection measures can be tested regularly.
◆ Overvoltage test: Regularly check whether the instrument can automatically cut off the power for protection or safety during the overvoltage protection system
