PoE (PSE) 10/100 Base - TX To 100 Base - FX Media Converter Iron Material

PoE (PSE) 10/100Base-TX to 100Base-FX Media Converter

Fiberroad PoE(PSE) Converter is a copper to fiber Ethernet solution, designed to make conversion between 10/100Base-TX or 10/100/1000Base-TX to 100Base-FX or 1000Base-FX, complies with IEEE802.3af Power Over Ethernet standard with build-in AC power.
Power Sourcing Equipment (PSE) which combines data received over a TP link with 48VDC power, providing power to IEEE802.3af powered device (PD) over the existing CAT5 UTP cable. And other support Link fault Pass-Through (LFPT), Store and Forward Switching, auto or forced mode setting for copper Ethernet as well as auto laser shutdown.

PoE(PSE) Converter ​Features

- ON when the power supply is turned on
- Bright when optic fiber cable is connected well, but no data transmission
- Blinking when receiving data
- ON when FX link is in full duplex mode
- OFF when FX link is in half duplex mode
- Bright when twisted pair is connected well, but no data transmission
- Blinking when receiving data
- ON when TP link is in full duplex mode
- OFF when TP link is in half duplex mode
- ON 100M
- OFF 10M
- ON when connect a correct PD load
- OFF when no load or wrong load
- Blinking when load is abnormal
- ON when POE 48V power is ok
- OFF when POE 48V power is losing or too low

PoE(PSE) Converter ​Technical Specifications:

Data Rates:
- 10/100 Mbps (802.3 10Base-T/802.3u 100Base-T)
- 100Mbps (100Base-FX)
Input Power Requirements:
- Input voltage ........................... 100 VAC to 240 VAC
- Input frequency ................................. 47 Hz to 63 Hz
Power over Ethernet Output:
- Pin Assignment and Polarity……...4/5 (V+),7/8 (V-)
- Output Power…..please refer to ordering information

- Efficiency ....................................................75% min
- Short circuit protection........................ auto recovery
- Over current protection ....................... auto recovery

Environmental Conditions:
- Operating temperature ....................... …0℃ to 50℃
- Cooling ........................................ free air convection
- Storage temperature ...................... -20℃ to +85℃
- Operating Humidity …... 90% max, non-condensing

Mechanical Specifications:
- Case Material………………………………Iron
- Case Color………………………………….Black
- Net Weight…………………….540g approx. / unit
- Dimensions………110(W) x 40(H) x 140(L) (mm)
Do not include transceiver length

Connectors:
- AC Inlet……………………………………IEC-J-4
- LAN……………………………….Shielded RJ-45

- Fiber………………………………see ordering information

PoE(PSE) Converter ​ Dimensions

Ordering Information:

*XX-XXX: supports optic connector / fiber type and distance. For more details,
please refer to the list below.