|
[China]
Trade Verify
Address: No.3939 Eurasian Ave., Chanba Ecological District, Xi'an, China
Contact name:Fiona Hou
Shaanxi Flourish Industrial Co., Ltd. |
|
Verified Suppliers
|
|
|
Hot Dip Galvanized Gray Full Threaded Flat Head Hex Bolt Suitable for Outdoor Work Steel Parts
Hot-dip galvanized bolts are special bolt products produced by
hot-dip galvanizing treatment and are widely used in industrial
infrastructure construction and machining.
After degreasing and rust removal, the bolts show a clean and
infiltrated surface, and are immediately immersed in a plating tank
where zinc has been heated and melted in advance. A method of
forming a zinc coating.
The coating of hot-dip galvanized bolts is thicker, generally 30-60
microns, and the coating has high anti-corrosion ability. Steel
parts suitable for outdoor work, such as highway Long-term rust
prevention of relatively "rough" workpieces such as road fences,
power towers, and large-size fasteners. Older iron water pipes were
also hot-dip galvanized.
In addition, hot-dip galvanized bolts are increasingly becoming the
preferred bolts for power towers, signal towers, and highway
guardrails due to their high strength and corrosion resistance.
1. Standard: DIN933, ASME B18.2.1, ISO 4017
2. Grade: 4.8,6.8,8.8,10.9
3. Head type: Hexgon Head
4. Size: M6-M72; 1/4"-3"
5. Material: Carbon Steel
6. Finish: Hot-Dip Galvanized
7. Delivery time: 10-30 days based on the order quantity
8. Package: cartons or plywood cases or pallet
9. A wide range of applications - highway or road fences, power towers, and large-size fasteners
FAQ:
| Q1: What is your main products? |
| A1: Our main products are fasteners: bolts, screws, nuts, washers, anchors and rivets. |
| Q2: How to ensure that every process's quality? |
A2: Every process will be checked by our quality inspection department which insures every product's quality. In the production of products, we will personally go to the factory to check the quality of products. |
| Q3: Do you offer free samples for checking the quality? |
| A3: Yes, the universal size are available for samples, but freight has to be paid by buyers. |
| Q4:Can you customize the products according to samples or drawing design? |
| A4:Yes. we have professional engineers to support the customized products for our customers. We can produce by your samples or technical drawings and build the molds and fixtures. |
| Q5: What is your payment method? |
| A5: 30% value of T/T in advance and other 70% balance before delivery. |
| For small order less than 3000USD, would suggest you pay 100% in advance to reduce the bank charges. |
