Marine Dancer Group |
|
XM200 Cold Milling Machine
XCMG XM200 cold planner, maximum milling width is 2000mm, new design.
XM200 Performance and characteristic
·The material conveying system consists of the material collecting
belt and the material discharging belt. The two-step belt conveying
devices are stepless speed regulation control, and the material
conveying belts can be freely folded by hydraulic pressure.
·The large-power CUMMINS engine with the power of 447KW is matched
with full set of electronic engine control device which fully meets
the American standard and European standard, has the overall
monitoring function which ensures extremely high working
reliability and low fuel consumption, and has the fully automatic
overload control system to carry out the overload protection to the
engine and ensure the miller continuously obtain best power at the
same time.
·The milling drum is driven by 12 high-strength V-typed belts to
ensure that the power is sufficiently and effectively transmitted
to the cutter; the fast cutter and cutter rest replacement system
is taken as the standard part assembly, which is easy to be
replaced at any moment. Furthermore, cutters with different
performances are provided to mill the material ranging from the
soft asphalt to the hardest cement concrete road surface. The
cutter arranged in spiral shape ensures the smoothness of the
cutting surface. The material discharging vane on the rotor formed
by the milling cutter rest ensures the milling material effectively
transmitted from the milling drum the initial belt conveyor.
·The moving driving system with 4 highly wear resistance rubber
crawler belt ensures obtaining the largest traction performance on
the precondition that the working speed of the machine is not
reduced. The working and moving speed belongs to the stepless speed
regulation, with four-wheel independent steering system which has 4
steering modes to be chosen, including the front wheel, rear wheel,
front and rear wheel matching and crab moving type, with high
working sensitivity.
·The milling depth control: the milling machine is provided with a
set of precise automatic control device which is convenient for
controlling the milling depth. Based on the two side plates of the
milling drum, the controlling device adjusts the length of the oil
cylinder in the front crawler supporting column by continuous
signal output and feedback, for keeping the arranged milling depth.
The driver can monitor the milling depth on the control tale or
ground, and the manual control can exceed the automatically
controlled instructions.
·Automatic power adjusting system: the fully automatic power
adjusting system makes the engine load automatically implement the
best match between the milling power and the driving power. The
adjustment of the automatic power can ensure the mechanism to exert
the best effect on any working conditions and not make the
mechanism overloaded. The automatic adjuster can exceed the
manually operated instructions.
·The intelligent control system can implement the advanced
functions such as the online display of the information,
malfunction diagnose, malfunction alarm and maintenance curing
prompt, etc. of the whole machine on the working mode and moving
mode; meanwhile, all datum can be objectively read by virtue of the
matched monitor.
·The hydraulic system, moving device: conveyor, cooling fan, water
injection de vice and all hydraulic control elements, etc. are
driven by the independent hydraulic motor. All hydraulic oil pumps
are driven by the diesel engine through the transfer case. The
return hydraulic oil and the hydraulic oil of all control- function
elements are filtrated by the oil return suction filter. The system
technology is advanced with reliable performance.
Model |
| XM200 | |
---|---|---|---|
| Max. milling with | mm | 2000 |
| Max. milling depth | mm | 320 |
Milling wheel | Number of tools |
| 168 |
Drum diameter with tools | mm | 980 | |
Engine | Model |
| QSX15 |
Rated power | kW | 447 | |
Rated speed | rpm | 2100 | |
Specifications | Operating speed | m/min | 0~30 |
Travel speed | km/h | 0~5 | |
Ground clearance | % | 80 | |
Ground clearance | mm | ≤300 | |
Operating weight | kg | 32500 | |
Volume | Fuel tank | L | 1300 |
Hydraulic oil tank | L | 400 | |
Water tank | L | 3400 | |
Conveyor | Width | mm | 800 |
Measurement | Overall machinery LxWxH | mm | 7130×2500×3000 |
Conveyor LxWxH | mm | 8000×1150×900 | |
Travel mode |
| Track |