Active Member
|
[China]
Address: NO.210, Long'an Road, Longquan Area, Chengdu, China
Contact name:Jiangyan Leng
CHENGDU MANUFACTURED D&C TECHNOLOGY CO., LTD |
|
|
MBK SNGA Super Finishing CBN Cutting Tools With High Precision High Toughness
The Grades and Applications Industries of MDC CBN Cutting Tools
| Grade | Preferred Machining Mode | Processed Materials | Cutting speed Vc (m/min) | Cutting Fluid |
| MBK 7510 | Continuons finishing Interruped finishing | Be suitable for Grey Cast Iron | 600-1200 | Dry cutting Wet cutting |
| MBK7520 | Continuons finishing Interruped finishing | Be suitable for Grey Cast Iron | 600-1200 | Dry cutting Wet cutting |
| Be suitable for Powder Metallurgy | 90-200 | |||
| MBK7530 | Continuons finishing Interruped finishing | Be suitable for Powder Metallurgy | 90-200 | Dry cutting |
| MBK 9540 | High speed continuons finishing | Be suitable for Hardened Steel | 180-300 | Dry cutting Wet cutting |
| MBK 9550 | Continuons-lighted interruped finishing | Be suitable for Ball Bearing Steel and Cemented Steel | 100-175 | Dry cutting Wet cutting |
| MBK9530 | Continuons-medium interruped finishing Semi-finishing | Be suitable for Ball Bearing Steel and Cemented Steel | 140-220 | Dry cutting |
| MBK9560 | Continuons-heavy interruped finishing | Be suitable for Cemented Steel | 100-200 | Dry cutting |
Specification
| Type | Dimension | Standard cutting edge | Preferred Grade | |||||||||||
| MBK | MBK | MBK | MBK | MBK | MBK | MBK | ||||||||
| ISO | L | φi.c | s | φd | r | b | 7510 | 7520 | 7530 | 9530 | 9540 | 9550 | 9560 | |
| SNGA120402-2S | 12 | 12.7 | 4.76 | 5.16 | 0.2 | 2.5 | T01020 T02020 S01020 S02020 | ● | ● | |||||
| SNGA120404-2S | 12 | 12.7 | 4.76 | 5.16 | 0.4 | 2.5 | ● | ● | ||||||
| SNGA120408-2S | 12 | 12.7 | 4.76 | 5.16 | 0.8 | 2.3 | ● | ● | ||||||
| SNGA120412-2S | 12 | 12.7 | 4.76 | 5.16 | 1.2 | 2.3 | ● | ● | ||||||
Note:Preference Cutting edge condition can be customized
Free trial products are provided if customer fill into Apply Form as below
| Application Form for Free Trial Products | ||||||
| Company | Address | |||||
| Contact | Email: | |||||
| Tel | Fax | |||||
| Cutting Paramerters Related | ||||||
| Processing form | A.Turning | B. Boring | C. Milling | |||
| Machine equipment | Brand and series no. | Quantity (pcs) | Max. Speed of spindle(rpm) | |||
| Workpiece | Name (like Roller,Pump,Gear etc.) | Material (like cast iron, HSS, hardened steel etc.) | Hardness(HRC or HB) | |||
| Cylinder Liner | ||||||
| Cutting Modes | A.Rough | B.Semi-finish | C.Finish | |||
| A.Continuous cutting | B.Light interrupted cutting | C.Middle interrupted cutting | D.Heavy interrupted cutting | |||
| RA | Cutting speed(m/min) | F(mm/r) | Cutting depth ap(mm) | Dry or wet cutting | ||
| Information of cutting tools used before or using now | ||||||
| Brand | Mode Code | AP | Vc or N | Lifetime(pcs/tip) | Dry or wet cutting | |
| wet cutting | ||||||
| Tool failure or change reason | Quantity of tool using per month | |||||
| Tool failure or change reason: A. Rake face wear B. Flank wear C. Chipping D. thermal fatigue E. Breakage F. Roughness | ||||||
| If the tool is milling cutter, please fill the blank follow also. If not, ignore it. | ||||||
| Main angle | Tooth | Width of cutting | Cutting quantity per tooth | |||
| Mark in the blanks of following factors you valued most of the tool, or write below others. | ||||||
| Efficiency | Cost | Precision | Tool working time | Others | ||
| Notes | (here you can write something you want us to pay special attention) | |||||
