Active Member
|
[China]
Address: NO.210, Long'an Road, Longquan Area, Chengdu, China
Contact name:Jiangyan Leng
CHENGDU MANUFACTURED D&C TECHNOLOGY CO., LTD |
|
|
TNGN MBN Solid CBN Cutting Insert With High Toughness Long Lifetime
The Grades and Applications Industries of MDC CBN Cutting Tools
| Grade | Preferred Machining Mode | Processed Materials | Application Industry |
| MBN6500 | Roughing | Excellent toughness and wear resistance ●Be suitable for High Nickel-Chrome, and High Hardness Alloy Cast Iron. ●Be suitable for Grey Cast Iron ●Be suitable for High Manganese Steel etc. | ●Roll,Pump, ●Brake disc, ●Mining machinery etc. |
| MBN6100 | Roughing | Good toughness and wear resistance ●Be suitable for High Nickel-Chrome, and High Hardness Alloy Cast Iron. ●Be suitable for High Manganese Steel etc. | ●Roll,Pump, ●Mining machinery etc. |
| MBN6000 | Semi-finishing Finishing | Excellent comprehenive performance, good universality: ●Be suitable for Grey Cast Iron, ●Be suitable for Hard Cast Iron ●Be suitable for Hardened Steel with hardness higher than HRC45. etc. | ●Brake disc, ●Brake drum, ●Compressor parts, ●Gear,Bearing etc. |
| MBN6200 | Roughing Finishing | Excellent wear resistance: ●Be suitable for Grey Cast Iron, etc | ●Brake disc ●Brake drum ●Compressor parts etc. |
| MBN8000 | Roughing Semi-finishing | Excellent toughness ●Be suitable for Hardened Steel ●Be suitable for Casting High Speed Steel ●Be suitable for Surface Bead-Welding materials etc. | ●Large Gear, ●Mining machinery, ●Roll, etc. |
| MBN8300 | Finishing | Be suitable for Hardened Steel with hardness higher than HRC45. etc. | ●Gear, ●Bearing etc. |
Note:Preference Cutting edge condition can be customized
Specification
| Type | Dimension | Standard cutting edge | Preferred Grade | ||||||
| ISO | L | φi.c | s | r | MBN6500 | MBN6200 | MBN8000 | MBN8300 | |
| TNGN 110304 | 11 | 6.35 | 3.18 | 0.4 | T01020 T02020 S01020 S02020 | ● | ● | ● | ● |
| TNGN 110308 | 11 | 6.35 | 3.18 | 0.8 | ● | ● | ● | ● | |
| TNGN 110312 | 11 | 6.35 | 3.18 | 1.2 | ● | ● | ● | ● | |
| TNGN 160404 | 16 | 9.25 | 4.76 | 0.4 | ● | ● | ● | ● | |
| TNGN 160408 | 16 | 9.25 | 4.76 | 0.8 | ● | ● | ● | ● | |
| TNGN 160412 | 16 | 9.25 | 4.76 | 1.2 | ● | ● | ● | ● | |
Free trial products are provided if customer fill into Apply Form as below
| Application Form for Free Trial Products | ||||||
| Company | Address | |||||
| Contact | Email: | |||||
| Tel | Fax | |||||
| Cutting Paramerters Related | ||||||
| Processing form | A.Turning | B. Boring | C. Milling | |||
| Machine equipment | Brand and series no. | Quantity (pcs) | Max. Speed of spindle(rpm) | |||
| Workpiece | Name (like Roller,Pump,Gear etc.) | Material (like cast iron, HSS, hardened steel etc.) | Hardness(HRC or HB) | |||
| Cylinder Liner | ||||||
| Cutting Modes | A.Rough | B.Semi-finish | C.Finish | |||
| A.Continuous cutting | B.Light interrupted cutting | C.Middle interrupted cutting | D.Heavy interrupted cutting | |||
| RA | Cutting speed(m/min) | F(mm/r) | Cutting depth ap(mm) | Dry or wet cutting | ||
| Information of cutting tools used before or using now | ||||||
| Brand | Mode Code | AP | Vc or N | Lifetime(pcs/tip) | Dry or wet cutting | |
| wet cutting | ||||||
| Tool failure or change reason | Quantity of tool using per month | |||||
| Tool failure or change reason: A. Rake face wear B. Flank wear C. Chipping D. thermal fatigue E. Breakage F. Roughness | ||||||
| If the tool is milling cutter, please fill the blank follow also. If not, ignore it. | ||||||
| Main angle | Tooth | Width of cutting | Cutting quantity per tooth | |||
| Mark in the blanks of following factors you valued most of the tool, or write below others. | ||||||
| Efficiency | Cost | Precision | Tool working time | Others | ||
| Notes | (here you can write something you want us to pay special attention) | |||||
