Wuhan Guoliang Instrument Co., Ltd |
|
Applications:
This stability test system is for an area of the pharmaceutical industry, to simulate climate environment temperature, humidity, light test. GMP requirements of the principle of 25 ℃ / 60% RH humidity conditions for long-term stability. In the accelerated test 40 ℃ / 75% RH humidity test six months standard.
Main technical parameters:
| Model | YG751E-HQ100L |
Inner dimensions | 500×400×500(mm)(L×W×H) | |
External dimensions | 650×800×1350(mm)(L×W×H) | |
Temperature range | 0℃~65℃ | |
Temperature deviation | ≤±2℃ | |
Temperature fluctuation | ≤±0.5℃ | |
Temperature uniformity | ≤2℃ | |
Humidity range | 30~95%RH | |
Humidity deviation | ≤±3%RH | |
Humidity fluctuation | ≤±2%RH | |
Humidity uniformity | ≤5%RH | |
Light range | 0~6500LUX adjustable | |
Light fluctuation | ±500LUX | |
UV illumination | 5 W/㎡ | |
UV illumination deviation | ±15% | |
The time required for 1.2 million lux • hr of ICH guidance recommends | ≒ 200hr | |
The time required 200W • hr / m of ICH guidance recommends | ≒ 50hr | |
Power supply | AC380V/50Hz | |
Operating power | 1.2KW (approximately) | |
Installed power | 2.9KW (approximately) | |
Volume | 100L | |
Structure Characteristics | Structure mode | Integral compressor at the bottom of the box; |
Drainage mode | Box liner using a special V-shaped design, convenient and effective to do because the water inside the humidity generated by the discharge; | |
Material | The outer wall: SEEC high and low temperature cold-rolled steel + powder coating; The inner wall: SUS304 stainless steel resistant to high temperature; Insulation materials: rigid polyurethane (PU) foam + glass wool insulation, thickness 100mm; | |
Studio door | Type: Single hinged door with a lock; Size: two frames imported silicone rubber seal; | |
Observation window | Location: mounted on the door; Material: embedded layer hollow glass; Quantity: 1; | |
Operation (test) hole | Size: Standard Φ50mm; Quantity: 1 set; Location: Located in the left side of the machine or on the side of the external test power line or signal line; (in accordance with customer demand, with stainless steel cover) | |
Sample rack | Three adjustable stainless steel sample holder; | |
Casters | High-quality lift casters 4 pieces; | |
Air conditioning system | Air circulating means | Strong and efficient centrifugal fan; |
Circulation fan | Extended stainless steel shaft motor; | |
Heating method | Nichrome strip heaters, PID regulation; Actuator: solid state relay; Completely independent of the system, does not affect the freezing and control lines; Temperature control via the engine output power microcomputer calculus, to achieve high accuracy and high efficiency power efficiency; | |
Air Cooling | Efficient finned evaporator; | |
Control method | Forced air circulation balanced temperature; | |
Lighting system | Installation method | Lamp cover is any disassembled, shades can be inserted on the top and bottom of the cabinets; |
Control method | Lighting value can be set in the controller; | |
Light adjustment | Light intensity can be adjusted in the controller; | |
Humidification and dehumidification system | Electronic and micro-bit mode humidification system; (humidification system)
| |
Diving disc Mining entire stainless steel; | ||
Mining evaporator coil dew point temperature (ADP) laminar contact with dehumidification mode; | ||
With overheating, double overflow protection device; | ||
Humidification, dehumidification system is completely independent; | ||
Mechanized float level control valve, to prevent electronic malfunction; | ||
Wet water for mining automatic replenishment system, the buyer must bring their own water and drain; | ||
Refrigeration system and electric control system | Refrigeration Compressors | Two sets of Danish import "Danvers" closed high temperature compressor; |
Refrigerant | Using green refrigerant R404a ozone depletion coefficient of zero; | |
Condensation mode | Efficient air-cooled finned condenser; | |
Temperature sensor | Pt100 armored platinum resistance; | |
Humidity sensor | Capacitive sensors; | |
Temperature and humidity controller | South Korea imported touch screen controller; | |
Temperature control device specifications: | Accuracy: 0.01 ℃, parsing degree: 0.1 ℃; | |
Control method | Heat balance humidity thermostat mode; | |
User Program | Instrumentation can display set parameters, number of currently running programs, run step and step the remaining time, the heater working condition, humidifiers work state, tendency to run the program, the remaining number of the current cycle; | |
Operation mode | Program to run automatically, auto power off after the shutdown; Instrument can be achieved manually PID control and PID self-tuning function; Instrument can be implemented in a timely manner about to run automatically and run; Setting instrument can control and program control switching worry; | |
Experimental data show | Set the temperature and humidity, the measured temperature and humidity, set humidity, the measured humidity, total running time, running time, the heating state. According to the experimental conditions can also control the compressor controller can automatically start or stop; | |
Fault information | Display FAULT condition, the possible cause analysis; | |
Refrigerator conditions | Automatically selected according to the experimental conditions; | |
Safety devices | Working room | Temperature and humidity on the run, the lower limit alarm, over-temperature alarm protection, pressure relief device; |
Cooling System | Compressor overpressure protection, overcurrent protection, thermal protection; | |
Ground protection | Structure safety grounding protection; | |
Heating system | Working room over-temperature protection; | |
Humidification system | Humidification system water protection; Humidification control overheating protection; | |
Circulation fan | Circulation fan overcurrent protection; | |
Power System | With phase sequence protection, power phase and phase sequence error protection; Leakage Protection; Heater short circuit overcurrent protection; | |
Alarm system | Sound and light alarm; | |
Chamber accessories | Sample turnover rack | 3 pieces(Single bearing weight≥50KG) |
Printer paper | 1 roll | |
Water tank | 1 piece | |
Water Pump | 1 piece |