Home Companies Shenzhen Haisen Technology Co.,Ltd

Disposable Ffp2 Valved Active Carbon Face Mask With Adjustable Nose Piece

Active Member

Contact Us

[China]

Address: Building A6, Nanpu Science & Technology Park, Haosi, Shajing, Baoan area, Shenzhen, P.R.C. 518104

Contact name:Queenie

Shenzhen Haisen Technology Co.,Ltd

Disposable Ffp2 Valved Active Carbon Face Mask With Adjustable Nose Piece

Country/Region	china
City & Province	shenzhen guangdong

Product Details

Disposable Ffp2 Valved Active Carbon Face Mask With Adjustable Nose Piece

Product:	Face Masks
Material:	Non Woven Fabric
Size:	Standard for adult
Colour:	Blue,pink,white
Imprint:	no logo
Feature:	can protect when outdoor
Quantity:	Any quantity available
Packing:	1pc/ sealed opp bag,40pcs/box

【High filtration】- High Technology Filters Almost 98% Of Airborne Particles Dust, Germs, Seasonal Allergies, Smoke, Car Exhausted Gas, PM 2.5 Pollution Ash.

【Designed for comfortable on-the-job protection】- Disposable Mask Is Lightweight, Humidity-resistant, Latex-free, Adjustable Metal Nose Strip And Comfortable Elastic Headband.

2 . Certification

This product has been tested according to the following European Standard:

CE Standard for Disposable Respirators
EN: 149:2001 + A1:2009
Distinguish	Filter Efficiency	Penetration	Resistant
FFP1 NR	≧80%	< 20%	< 21mmH₂O
FFP2 NR	≧94%	< 5%	< 24mmH₂O
FFP3 NR	≧99%	< 1%	< 30mmH₂O

EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.
EU type examination certificate (module B) issued by BSI , notified body n°0086.The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086.

3 . How to use?

Cup respirator in one hand with nosepiece at fingertips,allow headbands to hang freely below hand.
Hold respirator under chin,with nose piece up
Locate the upper strap across the crown of the head and the lower strap below the ears.
Strap must not be twisted
Using both hands,mould nose clip to the shape of the lower part of the nose to ensure a close fit and good seal.Pinching the nose clip using only one hand may result in less effective respirator performance.
The seal of the respirator on the face should be fit-checked before entering the workplace.
If the user feels the bottom strap is too loose and it is not possible to achieve a satisfactory fit of the mask a knot can be tied in the strap.

4 . Packing

Normal Packing 12pcs/box,240pcs/ctn.

5 . FAQ

Q: Can you provide free samples?

A: All samples are provided freely, it will takes3-5 days to prepare the samples.

Q: How does your factory control the quality?
A: All manufacturing are absolutely base on the pre-production samples. Meanwhile, we have a complete after-sales system.

Q: Could you embossed printing the logo on the face mask?
A: Yes, we can embossed printing the logo on the surface of face mask, OEM production is ok.

6. More pictures