WUXI Hai Roll Fone Science&Technology Co.,Ltd |
|
Dustproof Face Mask Manufacturing Machine / Medical Face Mask Machine
Face Mask Manufacturing Machine Advantages
1. The frame of face mask making machine is made of aluminum alloy and stainless steel, which is light and beautiful without rusting.
2. The face mask making machine adopted servo and constant temperature control system is controlled by PLC to make the material from coil material loading, folding and pressing, nose rib loading, mask forming, mask cutting, ear band loading and welding, finished product unloading, complete the whole set of production process fully automatic operation;
3. Intelligent control platform, easy to learn, one person can operate multiple machines;
4. High production stability, two output lines at the same time, greatly improving the output;
5. The equipment is highly automated and requires low level of operation staff. It only needs to place and finish the finished products.
6. The production speed of masks is 60-80 per minute, and the qualified rate is good.
Face Mask Manufacturing Machine Raw Material Recommendation
1. Cloth : meltblown nonwoven, PP nonwoven Qty.:2~4 rolls OD*ID:600mm*76mm
Width: OD*ID:280mm (max. width 300mm)
2. Nose clip: 1 roll, 400mm*76mm (width 3mm,thickness 0.35mm aluminum strip〉
3. Earloop: Qty. 2 rolls, width 3mm
Face Mask Manufacturing Machine Parameters
Name | Face Mask Manufacturing Machine |
Dimension | 8000mm(L) X1400mm(W) X1600mm(H) |
Color | International standard warm grey 1C |
Weight | ≤3000kg, ground weight capacity ≤500kg/m2 |
Working power | equipment 220VAC±5%; 50HZ;rated power 17KW |
Working air pressure | Compressed air pressure 0.5-0.8MPa; compressed air flux |
300L/min(stable flux guaranteed; oil and water have to be | |
filtered) | |
Production efficiency | 1800-2500PCS/H(based on 20 hours each day, daily |
capacity about 36,000-50,000 pieces) | |
Qualification ratio | 99%(excluding unqualified incoming materials, improper |
operation by employees) | |
Equip failure ratio | ≤2%(equipment failure itself) |
Operating | Temperature 10 一 35℃; humidity: 5-35%HR |
environment | No flammable, corrosive gas, no dust (cleanliness no less |
than 100,000 grade) |