WUXI Hai Roll Fone Science&Technology Co.,Ltd |
|
Air Pollution Touch Screen PLC N95 Mask Making Machine
Product Description
This equipment is a full-automatic one-time plane mask forming machine, which is used for the forming of one-time rectangular ear hanging three
drawer mask. It can complete the automatic feeding, moulding, folding, pressure welding and ear band welding of the
This product is used for the production of folding mask production line fully automatic machine, using ultrasonic technology, three to five layers of
PP non-woven fabrics, meltblown fabrics, activated carbon and filter materials are fused, non-woven fabrics are fused, ear bands are fused, printed,
folded, edge sealed and rolled, can produce 3m 9001,9002 and other folding masks. According to the raw materials used, the production of masks
can reach such as FFP1, FFP2, N95 and other different standards, the whole process without manual operation, all by mechanical production,
production is finished.
Product parameters
Dimension | 8000mm(L) X1400mm(W) X1600mm(H) |
Color | International standard warm grey 1C |
Weight | ≤3000kg, ground weight capacity ≤500kg/m2 |
Working power | equipment 220VAC±5%; 50HZ;rated power 17KW |
Working air pressure | Compressed air pressure 0.5-0.8MPa; compressed air flux
300L/min(stable flux guaranteed; oil and water have to be filtered) |
Production efficiency | 1800-2500PCS/H(based on 20 hours each day, daily capacity about 36,000-50,000 pieces) |
Qualification ratio | 99%(excluding unqualified incoming materials, improper operation by employees) |
Equip failure ratio | ≤2%(equipment failure itself) |
Operating environment | Temperature 10 一 35℃; humidity: 5-35%HR No flammable, corrosive gas, no dust (cleanliness no less than 100,000 grade) |
Details
Company Information
FAQ
1. Does one machine can only produce one size?
Not exactly, it depends on the machine.
2. Do you have after-sales support?
Yes, we are happy to give advice and also have skilled technicians available to maintain the machine if needed.
3. How to visit your company?
We can pick you up from Shanghai or Hangzhou airport. Or railway station Shaoxing North. 4. What can you do if the machine is broken?
Our machine's warranty period is 12months. if the broken parts can't repair, we can send the new parts to replace the broken parts, but you need to pay the express cost by yourself. if after the warranty period, we can through negotiation for solving the problems, and we supply the technical support for the whole life of the equipment.
5.Can you be responsible for transport?
Yes, please tell us the destination port or address. we have rich experience in transport.
6. You are a trade company or factory?
We are a Manufacturer.
7. Why your price is higher than others?
As we persist on that each factory should put quality in the first place. We spend time and money on developing how to make machines much more automatic, accurate, and high quality. We can make sure that our machine could use more than 20 years without any problem. 8. Do you have overseas engineers? Yes, we not only provide overseas engineers but also provide technical training. 9. Do you provide customized? Sure, we can design the equipment according to the data of the structural section you provide. We are a professional sheet metal forming machine designer and manufacturer.