|
[China]
Trade Verify
Address: Room 1608 Dingye International Mansion, No. 54 Moscow Road, Qingdao Free Trade Zone, China
Contact name:Michelle Zhang
Qingdao Florescence Marine Supply Co., LTD. |
|
Verified Suppliers
|
|
|
Ship rubber airbags, also called marine airbags, docking airbags,
ship lauching balloons, marie air bags , now have become one
convenient ship launching method in the some shipyards, especially
where slipways are not available.
Qingdao Florescence is the first company that initiated airbags for
ship launching in China from year of 1992. During the 20 years'
development and experience in airbag production and ship launching,
our ship launching airbags have become the most reliable.
1) Outer Rubber Layer
The outer rubber layer that covers the outside of marine airbag to
protect under layers from abrasion and other external forces. This
compound has sufficient tensile and tearing strength to withstand
any condition and hard usage.
2) Inner Rubber Layer
The inner rubber layer seals pressurized air inside marine airbags.
3) Synthetic-Tire-Cord Layer as Reinforcement
The reinforcement cord layers, which are made of
synthetic-tire-cord commonly used in tires, are arranged at ideal
angles to hold the internal pressure and distribute stress evenly.
So they can provide strong efficient reinforcement.
We usually produce and supply airbags in size of following as per
customer's launching requirement:
Diameter: 0.8m-2.8m
Effective length: 5m-24m
Layers: 3-10 layers
Diameter | Effective Length | Layers with cord | Working Pressure | Lifting Height | Tons/Airbag |
1.2m | 10m | 6 | 0.17MPA | 0.9m | 78.51tons |
1.5m | 12m | 8 | 0.18MPA | 1.2m | 100.50tons |
1.8m | 15m | 8 | 0.15MPA | 1.5m | 104.69tons |
2.0m | 18m | 10 | 0.17MPA | 1.5m | 235.54tons |
2.5m | 18m | 12 | 0.16MPA | 2.0m | 226.12tons |
A.Saving the investment of shipyard construction
The construction of launching facilities, like traditional slideway
and its underwater engineering, are very expensive.If using airbag
launch, only a simple launching slip way shall be built without
complex underwater engineering.
B.Simple operation,saving labor and work hours
Airbag launch avoids lots of trouble, such as the complex process
of cleaning away the mucky soil on the surface of the slideway,
covering or smearing with lubricating grease, setting slide plates
and transoms and then binding them with hull, so as to save
material consumption,manhour and expending time on
preparation.Usually the preparation for airbag launch
maybe finished within one or two days due to the whole process is
simple.The airbags may be reused by retrieving after
operatiion,that drops shipbuilding cost considerably.
