|
[China]
Trade Verify
Address: Room 1608 Dingye International Mansion, No. 54 Moscow Road, Qingdao Free Trade Zone, China
Contact name:Michelle Zhang
Qingdao Florescence Marine Supply Co., LTD. |
|
Verified Suppliers
|
|
|
High Strength And Air Tightness Of Marine And Boat Inflatable
Rubber Airbag
Storage of the inflatable rubber airbag
* If the air bag will not used for quite a long time, it shall be
washed and dried, filled with French chalk inside and coated with
French chalk outside as well as put in dry, shady and ventilated
place in the room.
* Place storing the air bag shall be far away from the heat source.
* The air bag can’t contact with acid, alkali, grease and organic
solvents.
* The air bag should be stretched flat when not used. it’s not
allowed to pole up and stack heavy object on the air bag.
Special attentions during the use of the airbag
* Control the working pressure strictly and it’s not allowed to
exceed the working pressure.
* There shall be no sharp and protruding hard object on the contact
surface with the airbag in case it punctures the skin of the airbag
.
* Try to avoid distortion happened to the length direction of the
airbag
* Empty charge test shall be performed if the air bag is not used
for a long time or reused after repair. Charge pressure if the
airbag shall be the same as the test pressure valve when delivered.
Inspectors shall be at least 3 meters away from the air bag. For
air bag recovered from large damage, its working pressure shall be
reduced reasonably. Besides, annual check shall be conducted on air
bag which are used often.
* Do not drag the air bag on the ground.
Quality guarantee
The product is up to the quality requirements of ISO14409:2011 “Air
bags for the up-to-slipway and launching of the ship.
Should quality problem happen within a year, it is guaranteed to
change or refund on the condition that the transportation, storage
and working conditions are up to the regulations.
Working pressure of Florescence marine rubber airbag:
| Diameter | Layer | Work pressure | Diameter | Layer | Work pressure |
| D=0.8M | 3 | 0.13 Mpa | D=1.5M | 3 | 0.07 Mpa |
| 4 | 0.17 Mpa | 4 | 0.09 Mpa | ||
| 5 | 0.21 Mpa | 5 | 0.11 Mpa | ||
| 6 | 0.25 Mpa | 6 | 0.13 Mpa | ||
| 7 | 0.30 Mpa | 7 | 0.15 Mpa | ||
| 8 | 0.33 Mpa | 8 | 0.18 Mpa | ||
| D=1.0M | 3 | 0.10 Mpa | D=1.8M | 3 | 0.06 Mpa |
| 4 | 0.13 Mpa | 4 | 0.08 Mpa | ||
| 5 | 0.17 Mpa | 5 | 0.09 Mpa | ||
| 6 | 0.20 Mpa | 6 | 0.11 Mpa | ||
| 7 | 0.25 Mpa | 7 | 0.13 Mpa | ||
| 8 | 0.28 Mpa | 8 | 0.15 Mpa | ||
| D=1.2M | 3 | 0.09 Mpa | D=2.0M | 3 | 0.05 Mpa |
| 4 | 0.11 Mpa | 4 | 0.07 Mpa | ||
| 5 | 0.14 Mpa | 5 | 0.08 Mpa | ||
| 6 | 0.17 Mpa | 6 | 0.10 Mpa | ||
| 7 | 0.20 Mpa | 7 | 0.12 Mpa | ||
| 8 | 0.23 Mpa | 8 | 0.14 Mpa |
Our service
Pre-sale service:Every product will be inspected before shipment,guarantee the
quality
On-sale service:Choose suitable package and transportation,gurantee the goods
reach to customers safely,save freight for customers
After-sale service:One-to-one VIP service
We solemn promise:
1) Contact with customers statedly
2) Guide the installation and using of products
3) Provide maintenance manual of related products
4) Provide mending material for products
