Juvi Marine Machinery Co.,LTD |
|
Impa 592071 Pneumatic Derusting Brushes Used For Shipbuilding Marine Boat Accessory
Product Description:
1.For Removing rust; used in machine building, mold making, and
container contrustion, in steel construction and shipbuilding as
well as in foundries.
2.Long tool-life due to ground conical wheels made of high-strength
material. The compact design makes rust removal easy, even in
places that are difficult to reach.No tiring thanks to excellent
weight-power ratio and the motor's vibration-free support. The
standardized chuck(available as M14 collet chuck)accepts all
standard brushes. Fast and efficient brush maintenance thanks to
compact built-in units. Screwed bevel gear wheels ensure that the
bevel gear is precisely aligned.
IMPA Code: | 592071 |
Power: | 600 watt |
Speed: | 9000 min-1 |
Chuck: | M14 x 2 mm |
Operating Pressure: | 6 bar |
Air Consumption: | 11.8 ltr/sec |
Air connection: | G 3/8" |
Weight: | 1.2 kgs |
Standard Accessories: | M14 chuck, Connection nipple, Tube nozzle, and Assembly too |
The utility model relates to a pneumatic tool for derusting the concave and convex surface of metal parts in shipbuilding, bridge, vehicle, machinery, construction, and other industries. Can also be used to clear welding slag, splash, casting yarn and repair chisel or clean rock and other operations. This function improves labor productivity, reduces labor intensity, and improves processing quality.
According to appearance and function, it can be divided into
pneumatic derusting gun, derusting needle, needle bundle derusting
machine, etc.
1. The model
2. Strike frequency
3. Needle diameter × length × number of roots
4. Outside diameter of the needle handle
5. Inlet size
6. Air pipe size
7. Dimensions
Correct practice of crew in derusting operation. Chemical corrosion
is a direct result of chemical reactions caused by moisture, salt
and the corrosiveness of the carrying cargo, including scraping of
the ship against the wharf, damage in loading and unloading, and
damage to the hull coating caused by wind and waves.
1, rust removal method
(1) thin rust. - Generally formed on the deck or the surface of new
steel, scrape with a shovel knife and then clean with a wire brush,
it can be completely removed.
(2) thick rust. - Formed in not easy to knock shovel or dark and
humid places, because of long-term not removed, more and more thick
rust into block or sheet. This rust is best first with electric or
pneumatic hammer knock, with a small hammer processing. Because
there are often spots of rust under the large rust, it must be
carefully looked for in order to completely remove.
(3) spot rust. - generally formed in the paint layer or between two
sheets of steel, it is often in the paint before the rust will not
be completely removed and left on the steel plate. Because its
outside is covered by paint, it is not easy to find in time, so it
often corrodes deeply. This rust is best struck at with a sharp
hammer. Steel rust, should be removed in time, otherwise it will
deepen. Therefore, remove rust
To be thorough, the shovel should not be too hard, so as not to
leave hammer marks on the steel, because hammer marks will cause
rust. Now many ships are equipped with mobile high pressure water
jet, rust removal efficiency is extremely high.