400x1000mm 400x1500mm Arch Rubber Fender With UHMW-PE Face Pad

DA Super Arch Rubber Fender Wuth UHMW-PE Face Pad For Ship Vessel Port Dock Berthing

Specification

1. Higher Energy: Absorption with lower Reaction Force than normal V type Rubber Fender.

2. More reasonable structure with high durability.

3. Flexible and convenient installation, wide selection of sizes and performances.

4. Front Panel with UHMW-PE Face Pad could be Installed on the top of fender to reduce surface pressure and friction factor with ship which keeps lower shear strength while vessel berthing.

Picture

Rubber fender

Rubber fenders, also known as rubber handguards, are installed on piers or ships to absorb collision energy between ships and piers or ships when they are docked or moored, and protect ships and piers from damage.

Transport and storage

1. Transportation

1) The mode of chord protection is automobile transportation.

2) During the loading and unloading process, the fender should be properly hoisted. It should be kept clean, not thrown or bumped, or hooked, punctured, or scratched with hard objects. The fender must be placed firmly.

3) The placed goods should be tied firmly to ensure that the goods are not shifted or loosened during the entire transportation process.

4) After the goods arrive at the designated place, use suitable lifting equipment to unload the truck to avoid damage and collision.

2. Storage

1) When storing rubber fender products, avoid direct sunlight, avoid rain and snow, and avoid contact with acids, alkalis, oils and organic solvents; keep the storage temperature at -15℃-40℃ away from the heat source 1 meter away .

2) The fender storage area is about 400 square meters. Examples of the selection of marine inflatable rubber fenders for small and medium-sized and large ships. The size of the inflatable rubber fender ranges from 500×1000 mm to 4500×12000 mm, including all standard and non-standard sizes.