Home Companies Dongguan Ming Rui Ceramic Technology Co.,ltd

High Flexural Strength Square Ceramic Tube Zirconia Material High Hardness

Active Member

Contact Us

[China]

Address: NO 21st ChuangXing Road, Shangsha community , Changan Town, Dongguan city Guangdong province, China

Contact name:Admin deng

Dongguan Ming Rui Ceramic Technology Co.,ltd

High Flexural Strength Square Ceramic Tube Zirconia Material High Hardness

Country/Region	china
City & Province	dongguan guangdong
Categories	Steel Sheets

Product Details

High Flexural Strength Square Ceramic Tube Zirconia Material High Hardness

Tag Key words : Square Ceramic Tube

Main Features of Square Ceramic Tube

1) High hardness.

2) High heat resistance:zirconia ceramic has excellentthermal stability,which means that it is widely used in areas where resistance to high temperatures is essential.

3) Good wear resistance: zirconia ceramic is the material of choice for zirconia wear parts.

4) High electrical resistivity: zirconia is an electrically insulating material.

5) High corrosion resistance: it is insoluble in water and only slightly soluble in strong acid and alkaline solutions. Good chemical stability of zirconia leads to high corrosion resistance.

Square Ceramic Tube has very high hardness, very high stiffness, very good corrosion resistance to chemicals at high temperature, and very high refractoriness or use temperature. They may be used for a variety of electrical, mechanical, and thermal applications. They may be used as setter plates for firing parts in a kiln. The may be used for high temperature furnaces and as high temperature refractory turntables. Square Ceramic Tube may also be used for jewelry or for applications requiring high wear or abrasion resistance. Your imagination is the only limiting factor in the spectrum of possible applications for this component. Be sure to view all photos as they are an integral component of the item description.

Specific Gravity or Density: 3.9 g/cm3

Water Absorption or Porosity: 0%

Fusion Temperature or Melting Temperature: 2000 °C or 3632 °F

Maximum Working Temperature: 1800 °C or 2800 °F

Thermal Conductivity: 25 W/m* K

Specific Heat: 0.9 J/g*K

Expansion Coefficient or CTE: 7.5 x 10 E-6 inches/°C

Electrical Resistivity at 20 C: 10 E14 Ohm*cm

Electrical resistance at 600 C: 10 E8 Ohm*cm

Modulus of Elasticity: 44 x 10 E6 p.s.i. or 350 GPa.

Product Name	High Flexural Strength Square Ceramic Tube Zirconia Material High Hardness
Material	zirconia
Color	White, Black , Blue , Yellow
OD	0.2mm - 200mm, And According to drawings
Length	5mm - 400mm, And According to drawings
Surface Roughness	Ra0.05
Torlerance	+/- 0.001mm
Lead time:	15 days
Max. working temperature	1500 -2800 °C
Samples	Avaliable
Shipping:	Air Express (DHL/UPS/TNT/ FedEx) or Ocean Shipping

Material Service:

Zirconia Ceramic: Mg-PSZ, Y-TZP, ZTA

Alumina Ceramic: 96%, 99%, 99.5% Al2O3

Silicon Nitride: Si3N4, RBSN, SRBSN, GPSN

Machinable Ceramic: Macor Ceramic

Machining Service:

Laser Cutting

CNC Machining

Cernerless Grinding and Inside Hole Honing

Surface Grinding and Polishing

Properties Sheet of zirconia and alumina :

Properties	Units	95 Alumina	99 Alumina	ZrO2
Density	g / cm³	3.65	3.92	5.95-6.0g/cm³
Water absorption	%	0	0	0
Coefficient of thermal expansion	10^-6/K	7.9	8.5	10.5
Modulus of Elasticity Young's Mod	GPa	280	340	210
Poisson's ratio	/	0.21	0.22	0.3
HV Hardness HV	MPa	1400	1650	1300-1365
Flexural Strength @ room temperature	MPa	280	310	950
Flexural Strength @700°C	MPa	220	230	210
Compressive Strength @ room temperature	MPa	2000	2200	2000
Fracture Toughness	MPa *m ^1/2	3.8	4.2	10
Heat conductivity @ room temperature	W/ m*k	18-25	26-30	2-2.2
Electrical Resistivity @ room temperature	Ω*mm² /m	>10¹⁵	>10¹⁶	>10¹⁵
Max use temperature	°C	1500	1750	1050
Resistance to acid alkaline	/	high	high	high
Dielectric Constant	/	9.5	9.8	26
Dielectric Strength	KV/mm	16	22	/
Thermol Shock Resistance	△ T ( °C )	220	180-200	280-350
Tensile Strength @ 25 °C	MPa	200	248	252

Company Introduction
Mingrui ceramic manufacture and provides alumina ceramic components for a wide range of application like Mechanical Equipment, Electronic & Electrical, Oil Drilling, Medical, Chemical Industry etc. According to actual application and customer's requirement, the purities vary from 95%-99.7% and the forming methods will be different. The forming methods applied in our plant include dry pressing, isostatic pressing, injection moulding, extrusion moulding. With experienced engineers and talented workers, we are confident to offer high quality, high precision, complex components for customers worldwide.

More Related photos :

Delivery:
Custom OEM will be shipped within 15 days after determining the parameters
The samples will be shipped within 3 days
Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
Support customer to designate shipping company
For more informations (the price,delivery time,moq etc)about the ceramic plates, please contact us or email:admin@cerampart.com

CEO: Admin deng

Dongguan Mingrui Ceramic Tech. Co. Ltd.

Add: No.21 Chuangxing Rd., 2nd Industrial Zone of Shangsha,

Chang'an town, Dongguan city, Guangdong, China 523867

Email: admin@cerampart.com

FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.