Active Member
|
[China]
Address: NO 21st ChuangXing Road, Shangsha community , Changan Town, Dongguan city Guangdong province, China
Contact name:Admin deng
Dongguan Ming Rui Ceramic Technology Co.,ltd |
|
|
Electrical Insulation Alumina Ceramic Parts Silicon Wafer Cutting
Machine
Features:
1. Wear resistance 10 times stronger than common pipes on even
ground
2. Corrosion resistance Lined integrated ceramic tube can resist
strong sour and alkali
3. Impact & Brash resistance Can resist brush by material of
big grain size without cracking
4. Smooth wall of interior and exterior,airflow unobstructed Smooth
surface make good flow ability and avoid blocking
5. Reduced maintenance Super wear resistance greatly reduce the
frequency of maintenance,lower the cost and labour charges.
Industrial Ceramic Intriduction
Aluminium Oxide, Al2O3 is the most widely applied and cost
effective technical ceramic material. It offers a combination of
superior mechanical strength and electrical properties, wear
resistance and corrosion resistance. The maximum working
temperature is up to 1700 °C with relatively high thermal
conductivity. It is also an electrically insulating material with a
high electrical resistivity. The good corrosion resistance makes it
insoluble in water and slightly soluble in strong acid and alkaline
solution.
Company Introduction
Mingrui ceramic manufacture and provides alumina ceramic components
for a wide range of application like Mechanical Equipment,
Electronic & Electrical, Oil Drilling, Medical, Chemical
Industry etc. According to actual application and customer's
requirement, the purities vary from 95%-99.7% and the forming
methods will be different. The forming methods applied in our plant
include dry pressing, isostatic pressing, injection moulding,
extrusion moulding. With experienced engineers and talented
workers, we are confident to offer high quality, high precision,
complex components for customers worldwide.
Product Description
Precision Ceramics has years of experience designing and developing
technical ceramic solutions for a wide variety of applications and
industries. Electrical Insulation Alumina Ceramic Parts Silicon
Wafer Cutting Machine. We offer this expertise to all of our
customers to ensure the best design and materials are chosen for
their specific application and needs. Electrical Insulation Alumina
Ceramic Parts Silicon Wafer Cutting Machine, Typically, our custom
technical ceramic components and parts we supply are used for one
of three main reasons:
Electrical Insulation Alumina Ceramic Parts Silicon Wafer Cutting
Machine
High temperature ceramics – crucibles, nozzles, lasers,
furnace/kiln fixtures
Electrical Insulation Alumina Ceramic Parts Silicon Wafer Cutting
Machine
Wear and corrosion resistant ceramics – plates, housings, gages,
caps/lids
Electrical Insulation Alumina Ceramic Parts Silicon Wafer Cutting
Machine
Electrical insulation ceramics – contact blocks, standoffs,
fasteners, spacers
Electrical Insulation Alumina Ceramic Parts Silicon Wafer Cutting
Machine
Precision Ceramics is one of the world’s premiere technical ceramic
suppliers – contact us to see what technical ceramics we can create
for you.
Electrical Insulation Alumina Ceramic Parts Silicon Wafer Cutting
Machine
| General Characteristics of Materials: | ||||
| Characteristic | Ceramics | Metals | Polymers | Refractory |
| Density | Low to High | Low to High | Low | Low to Medium |
| Hardness | High | Medium | low | Medium |
| Toughness | low | High | Medium | low |
| Wear Resistance | High | Medium | low | Medium |
| Tensile Strength | Low to Medium | | low | low |
| Compressive Strength | High | Medium to High | low to Medium | High |
| Young’s Modulus | Medium to High | Low to High | Low | Medium |
| Dimensional Stability | High | low to Medium | low | / |
| Thermal Expansion | Low to Medium | Medium to High | High | low |
| ThermalConductivity | Medium | Medium to High | Low | Medium |
| Thermal Shock | Low | Medium to High | High | low to Medium |
| Electrical Resistance | High | low | High | / |
| Chemical Resistance | High | low to Medium | Medium | / |
| Oxidation Resistance | Medium to High | low | low | / |
| Machinability | Medium | low | Medium | / |
| Product Name | Electrical Insulation Alumina Ceramic Parts Silicon Wafer Cutting Machine |
| Material | Alumina Ceramic or zirconia ceramic |
| Color | white or black or customed |
| Standard | according the request of customer |
| Grade | first class |
| Brade | Rock |
| Thread | coarse, fine |
| Used | Electrical Insulation Alumina Ceramic Parts Silicon Wafer Cutting Machine |
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is
15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay
the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30%
T/T in advance ,balance before shippment.
If you have any other question, pls feel free to contact us .
