Active Member
|
[China]
Address: NO 21st ChuangXing Road, Shangsha community , Changan Town, Dongguan city Guangdong province, China
Contact name:Admin deng
Dongguan Ming Rui Ceramic Technology Co.,ltd |
|
|
Ceramic Weld Location Pins for Projection Welding Si3N4 Silicon Nitride Stop Pin for Welding
Full-ceramic pins have much lower thermal conductivity than hard-metal pins Superior abrasion resistance compared to hard metal pins, with higher tensile strength and higher max operating temperatures Treated properly, full-ceramic pins last much longer than other pin materials
ceramic weld pin is a standard shape and size for projection welding applications. Ceramic pins provide high durability and reliability at a much lower cost than full ceramic pins, and are less prone to shattering after being mishandled or dropped. Ceramic-coated pins are more durable and cost-effective than anodized steel or KCF, and do not require heat treatment before use.
For dimensions and specifications, see the diagram in the pictures above.
| Product Name | Ceramic Weld Location Pins for Projection Welding Si3N4 Silicon Nitride Stop Pin for Welding |
| Material | zirconia ceramic or silicone nitride |
| Color | White, Black, dark grey |
| Type | Insulating ceramics for welding |
| HV hardness | 1300-1700 |
| Density | 3.2-6.0 g /cm3 |
water absorbsion | 0% |
| Compressive strength | 2200 mpa |
| Max use temperature | 1500 -1700 °C |
| Samples | Avaliable |
| Shipping: | Air Express (DHL/UPS/TNT/ FedEx) or Ocean Shipping |
Do not find similar ceramic products on this page?
For more detail of ceramic products like price,shipping,samples...
Quick Free Quote . Our official E-mail: admin@cerampart.com(Mr admin).thanks
Silicon nitride ceramic welding pin made of silicon nitride significantly increase service life and enable high levels of precision and greater accuracy over extended periods in projection welding. Metal welding pins often need to be replaced several times a day due to wear and adhering slag, whereas centering pins made of silicon nitride ceramics only need to be replaced about once a month.
Features :
1. High temperature resistance: 99.7% Al2O3 pins can stand 1800C at most. 95% Al2O3 rods can stand 1500C at most.
2. Good abrasive resistance: 99.7% Al2O3 rods, 3.9g/cm3, 95% Al2O3 rods 3.6g/cm3.
3. Good insulating property.
4. Tight tolerance: we can grind and polish the outer surface and length. Size tolerance can be +/-0.02mm after machining.Surface roughness can reach to Ra0.2um.
5. Fast delivery, we have large quantity alumina ceramic rods and blanks in stock.
6. Inspection, each single rods will be tested before shipping.
7. Low shipping cost, we have long time cooperation with shipping company, which can provide us very low prices.
Ceramic adapter plate,Ceramic centering pin,Ceramic connectors,Ceramic spinner,Ceramic roller
Ceramic blade,Ceramic brackets,Ceramic disc,Ceramic insulator,Ceramic rod,ceramic atomizer
ceramic fuse pin,ceramic nozzle,ceramic ferrule,ceramic necklace,ceramic ornament,alumina ceramic plate, ceramic cylinder, ceramic guide, ceramic pin, ceramic bushing, ceramic brick,ceramic injection molding,ceramic bushings,ceramic smoking pipe, ceramic spacer,ceramic piston pump,ceramic part
ceramic heating element vaporizer e cigarette, al2o3 ceramic, ceramic donut atomizer, alumina ceramic disc, alumina ceramic sheet , ceramic alumina , ceramic pressure sensor , ceramic sheet,
ceramic washer, zirconia ceramic plate, ceramic insert, white ceramic ring, ceramic shaft
ceramic pump, ceramic piston, ceramic nail, ceramic insulators, ceramic rod 3mm , ceramic dowel pin
ceramic pin gage , alumina ceramic parts , ceramic burr , ceramic proppant , ceramic needle
ceramic grinder, alumina ceramic rod , alumina ceramic ring, ceramic conical burr , ceramic heater rod
ceramic gear , machinable ceramic, ceramic arms , white ceramic ornaments , sustained high temperature on ceramics
Mingrui offers you a wide range of production facilities like extrusion, injection moulding, pressing and casting. Depending on product geometry and quantities, we will choose the suitable technique for your products.For the final finishing of the parts we use CNC machining centres, equipped with diamond tools in order to meet high accuracies.
Our aim is to offer the ideal solution for any application. Our engineers therefore offer custom solutions that range beyond our existing product portfolio. With our well-equipped industrial development facilities, we produce innovations that can be rapidly commercially exploited.
Properties Sheet of zirconia and alumina :
| Properties | Units | 95 Alumina | 99 Alumina | ZrO2 |
| Density | g / cm³ | 3.65 | 3.92 | 5.95-6.0g/cm³ |
| Water absorption | % | 0 | 0 | 0 |
| Coefficient of thermal expansion | 10-6/K | 7.9 | 8.5 | 10.5 |
| Modulus of Elasticity Young's Mod | GPa | 280 | 340 | 210 |
| Poisson's ratio | / | 0.21 | 0.22 | 0.3 |
| HV Hardness HV | MPa | 1400 | 1650 | 1300-1365 |
| Flexural Strength @ room temperature | MPa | 280 | 310 | 950 |
| Flexural Strength @700°C | MPa | 220 | 230 | 210 |
| Compressive Strength @ room temperature | MPa | 2000 | 2200 | 2000 |
| Fracture Toughness | MPa *m 1/2 | 3.8 | 4.2 | 10 |
| Heat conductivity @ room temperature | W/ m*k | 18-25 | 26-30 | 2-2.2 |
| Electrical Resistivity @ room temperature | Ω*mm2 /m | >1015 | >1016 | >1015 |
| Max use temperature | °C | 1500 | 1750 | 1050 |
| Resistance to acid alkaline | / | high | high | high |
| Dielectric Constant | / | 9.5 | 9.8 | 26 |
| Dielectric Strength | KV/mm | 16 | 22 | / |
| Thermol Shock Resistance | △ T ( °C ) | 220 | 180-200 | 280-350 |
| Tensile Strength @ 25 °C | MPa | 200 | 248 | 252 |
Drawings of some items:
Delivery:
Custom OEM will be shipped within 15 days after determining the
parameters
The samples will be shipped within 3 days
Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
Support customer to designate shipping company
For more informations (the price,delivery time,moq etc)about the
ceramic plates, please contact us or email:admin@cerampart.com
CEO: Admin deng
Dongguan Mingrui Ceramic Tech. Co. Ltd.
Add: No.21 Chuangxing Rd., 2nd Industrial Zone of Shangsha,
Chang'an town, Dongguan city, Guangdong, China 523867
Email: admin@cerampart.com
FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
