|
[China]
Trade Verify
Address: Jingfa Avenue, Economic Development Zone, Yichun, Jiangxi, China
Contact name:Ronan
Jiangxi Zhongtian Intelligent Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
Tower crane monitoring camera system
The Tower crane monitoring system refers to installing a set of video monitoring devices on the original tower crane including far end camera, cabin VCR, indicator, monitor in the office, and wireless transceiver. The system will be more convenient for the operator to observe the ground working zone. The focusing keyboard in the cabin can ensure the operator watch load hook status at different heights and angles. In addition, the image at the far end can be back to monitoring for site safety and digital management.
Tower crane safety monitoring system details
The system supports wireless data browsing. Users only need to install the corresponding monitoring software on-site management PC and connect the communication antenna to real-time monitor the status information of each tower crane, including the real-time height of the tower crane, working radius, load quality, slewing angle, on-site wind speed, and anti-collision information. In addition, the manager can also modify and upload site and tower crane data through monitoring software. When the tower crane needs to forcibly cross obstacles enter dangerous areas, he can remote authorize to see if this operation is allowed.
Tower crane monitoring system parameters
Image Sensor | 1/2.8" IMX307 CMOS |
Highest resolution | 1920x1080 or 2048x1536 |
Video compression | H.265+/H.265/H.264 |
Horizontal and vertical range: | 360 ° Horizontal; -15 ° ~ 90 ° Vertical |
Full-color visible distance | 100m |
Digital noise reduction | 3D digital noise reduction |
Electronic shutter | 1/3s to 100,000s |
Signal to noise ratio | >52dB |
Power | 40W max |
Voltage | DC12V |
Working temperature & humidity | -40 ºC ~ + 85 ºC, humidity is less than 95% |
IP level | IP66, TVS 6000V |
Monitor camera safety system function description
Supervisor
Real-time monitoring Tower crane layout, position and movement on site ground computer.
Display the slewing, trolley position, hook height, load moment, wind speed for each crane on site.
Modification of Tower crane parameters.
Adjustment of Tower crane height after jacking.
Apply Bypass from site ground.
Upload protection zone for immediately action.
Playback the monitoring record of specific period
Safe lifting camera
Suitable for all types of cranes and operating conditions
This will always show hooks and loads
Strong against shock and vibration
The operator can check the camera under any circumstances
Tower crane smart monitoring system working
