SHENZHEN JULIXING INSTRUMENTS CO., LTD. |
|
BS EN 1363-1 UK Plug Socket Gauge, BS1363-2 British Standard Plug and Socket-Outlets Gauge
BS1363 Uk Plug And Socket Gauge, British Bs1363 Plug and Socket Outlets Gauge
1. Application:
Chuang Xin offers a wide range of gauge to meet the most common
standards including those from IEC, EN, UL, GB, DIN, VDE and other
similar international standards. Such standards require the
checking of size & definition etc, these gauges are constructed
from senior stainless steel and appropriate steel with a hardness
of at least 60HRC and a roughness according to standard require.
British standards test gauge is strictly designed and manufactured
according to the relevant standard requirements of BS1363-2.
This plug and socket test gauge is mainly used to test and inspect
whether the structure and size of plugs and sockets conform to
BS1363-2 standards. And the mainly application industries is
electronics, electrical appliances, plugs and sockets and other
similar areas.
2. Features:
Gauge dimensions, tolerances, material, hardness, surface roughness
conform to the standards requirements;
Surface corrosion and abrasion resistance can resist normal contact
corrosion and not embroidered patch (the operator hand may exist in
the sweat, the corrosion effect equivalent to NACL salt solution or
NH4CL salt solution corrosion);
Material hardness is more than 60HRC;
Material thermal expansion coefficient is small, dimensions and
tolerances is stable and reliable.
It is designed according to the relevant provisions of BS1363-2.
It is used to check the technical parameters and size of plugs and sockets.
Concrete products:
1. Socket contacts gauge (BS1363Figure 12), it is a standard
measuring device to check if it is connected as a test sample.
2. Socket do not contact gauge (BS1363-2 Figure 14): it is a
standard measuring device to check if it is not connected as a test
sample.
3. Transversal stress test gauge (BS1363-2 Figure 15): By
simulating the bolt to insert into the socket test samples and
imposing the prescribed weight force (poise) at the stated point to
check whether the socket fits to the standard requirements.
4. Grounding minimum pull out force gauge (BS1363-2 Figure 16a): By
simulating the grounding bolt insert into the socket test samples
and imposing the prescribed vertical downward force (poise) to
check whether the socket is fits to the standard requirements.
5. Diversion jack minimum pull out force gauge (BS1363-2 Figure
16b): By simulating the bolt of the firing line or zero line to
insert into the socket test samples and imposing the prescribed
vertical downward force (poise) to check whether the socket is fits
to the standard requirements.
6. Socket and jack gauge (BS1363-2 Figure 11 or BS1363-1 Figure 11): Socket test samples through using the gauge to check whether the relative position of the hole, the size and depth of the hole, and whether the socket joint surface had fit to the standard requirements. There are two specifications of the go gauge, large and small.
7. Plug location and size gauge (BS13631 Figure 5). Plug test
sample uses the gauge to check whether the relative position and
the length of the pin as well as its joint surface with the plug
whether it is fit to the standard requirements.
Testing Gauge BS1363 British Standards Plug Gauges | ||
Name | Description | QTY(piece) |
BS1363-2-Fig1 | Test PIN | 1 |
BS1363-2-Fig2a.2b | Elastic shell mechanical strength test device | 1 |
BS1363-2-Fig 5 | plug gauges | 1 |
BS1363-2-Fig11 | plug gauges | 2 |
BS1363-2-Fig12 | Contact test gauge | 1 |
BS1363-2-Fig14 | Non contact test | 1 |
BS1363-2-Fig15 | Insert transverse stress gauge | 1 |
BS1363-2-Fig16 | Insert pull-out force gauge | 2 |
BS1363-2-Fig17a/b | Temperature rise test device and the simulationpanel | 1 |
BS1363-2-Fig19 | Stainless steel solid fuse | 1 |
BS1363-2-Fig23 | Pressure test device | 1 |
BS1363-2-Fig29 | correction clamp | 1 |
BS1363-2-Fig30 | gauges | 1 |
Shenzhen Julixing Instruments Co., Ltd. are specialized in manufacturing special, custom built, test and measuring equipment for products testing as per international norms and offering calibration services and related information. Our products and services are used by research & development establishments, test laboratories, defense establishments, government institutions & manufacturing industries to fulfill the clients' requirements.
If you require testing equipment to test products such as home
appliances, electrical accessories like switches, sockets,
connectors, etc. industrial & road lighting luminaires, automobile lighting systems or related categories, we can provide
the solutions you need.
We would appreciate your comments on the layout design,
presentation or other aspects of our website.
Website: http://www.china-item.com
Contacts: Eason Wang
E-mail: sales@china-item.com
TEL: +86-755-33168386
FAX: +86-755-61605199
Phone: +86-13751010017
SKYPE: carlisle.wyk
Address: 1F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China
ZIP Code: 518101
Website: http://www.china-item.com/