Active Member
|
[China]
Address: 2#B13 Floor, Skyworth innovation Valley, Tangtou No.1 Road, Shiyan Town, Baoan District, Shenzhen City, P.R.China
Contact name:Wang
Jaton Technology Limited |
|
|
JATONTEC JT6200M is highly advanced CAT6 LTE outdoor multi-service product solution specifically designed to meet integrated data, voice and Wi-Fi access needs for residential, business and enterprise users. The product consists of an outdoor data CPE unit (ODU) and an indoor multiservice gateway unit (HGW) that supports advanced networking, VoIP gateway and WLAN AP functionalities. It enables wide service coverage and provides high data through put and networking features to customers who needs easy broadband access, low cost VoIP service and Wi-Fi connectivity.
Key Benefits
Cost effective &compact design with built-in high gain LTE
and WiFi antenna
Full compliance to 3GPP2 TD-LTE Release10 specifications.
Advanced MIMO support and Category 6throughput
Dual LAN ports, SIP 2.0 VoIP and 802.11b/g/n/acMIMO Wi-Fi support
Router, bridge and by-pass networking, IPv4 &v6 and Multiple
PDN support
Built-in VPN and L2/L3 GRE client support
FTP, HTTP and TR-069 management support
SIM card authentication and virtual SIM support
Support Frequency 3.5GHz CBRS BandB42/43 or Band38/40/41
RELIABLE PERFORMANCE
JT6200M CPE product provides the standard implementation of LTE
release 10 specifications. With the built-in high gain ODU antenna,
it enables a longer reception range from eNodeB base station. This
help yields more efficient use of network with a larger cell reach,
carrier class service,and more customer service probability.
The HGW unit has 2 Gigabit LAN Ports,1 Gigabit WAN Portand,1 RJ11
port, built-in 2x2 MIMO high performance 802.11b/g/n/ac Wi-Fi and
software firewall for security, providing an effective all-in-one
solution to SOHO or residential customers. It supports LTE
release10 CA option and CAT6 data throughput which can be very
competitive to wired broadband access service.
EASY USAGE & MANAGEMENT
JT6200M is a user-friendly and easy to setup LTE CPE.The ODU can be
powered by the 48V PoE via the Router WAN port. The LEDs on the
AM6200M have also been designed for user convenience, and offer a
clear sign of what the device is doing. The compact design is well
suited for enterprise and residential user.
The JT6200M offers rich management features which facilitate the
task of service provider. It supports local management access,
Telnet, WEB, and centralized remote OTA configuration, upgrades
management and device monitoring via standard TR-069 ACS systems.
TECHNICAL FEATURES
The JT6200M is fully compliant to the LTE Release10 specification. It offers standard support for advanced 4G features such as MIMO and AMC to maximize the system capacity and bandwidth throughput. The use of 4G modulation enhances performance in non-line-of-sight conditions to ensure immunity to interference and multi-path conflicts typical of deployments in urban areas. Sophisticated QoS capabilities ensure true end-to-end QoS and support for high quality data services. JT6200M has enhanced router function and VPN clients support to enable greater service selection and reliability.
LTE Radio Interface (ODU)
WiFi Interface (HGW)
802.11ac (867 Mbps)
PHYSICAL & ENVIRONMENTAL
Power DC : 48V/0.5A DC(HGW)
Weight : ODU<1.5Kg, HGW<300g
Dimensions: 310mm x 122mm X75mm (ODU)
163mm x 130mm x30mm (HGW)
Environment : Operating Temperature, -40℃~55℃.
Storage Temperature -30°C--85°C
Humidity, 90% max Non-condensing
Water Protection : IP 67(ODU)
User Interfaces (HGW)
WAN ODU :1 RJ45 10/100/1000M ETH (PoE)
LAN Data Interface: 2 RJ45 10/100/1000M ETH
Voice Line Interface: 1 RJ11/FXS Line
HGW LED Indicators: SYS, NET, 2.4GHz Wi-Fi
5GHz WiFi,LAN1-2,LINE, WPS
CONFIGURATIONS & MANAGEMENT
Network configuration:
Data Networking Features:
Device Management:
