|
[China]
Trade Verify
Address: No.117 Fengshen Avenue, Xiuquan Street, Huadu District, Guangzhou,China
Contact name:Jacky
Guangzhou Ruihe New Material Technology Co., Ltd |
|
Verified Suppliers
|
|
|
Excellent Optical Transparency Two Components Silicone Rubber Odorless For Funny Accessories
Typical Properties
| RH5350-40 | |||
| Properties | Unit | A | B |
| Appearance | / | transparent | transparent |
| Density | g/cm3 | 0.99 ± 0.02 | |
| Shore A Hardness | A/JLS | 40 ± 2 | |
| Tensile Strength | MPa | ≥ 3.0 | |
| Elongation at break | % | ≥ 180 | |
| Tear Strength | KN/m | ≥ 7.0 | |
| Linear Shrinkage | % | ≤ 0.1 | |
| Tensile set | % | ≥ 0.8 | |
| Rebound | % | ≥ 40 | |
These figures are for reference only, please contact us for
details.
The mixing ratio of components A: B = 1: 1.
Vulcanization: 150 °C / 5 min
Why do you choose RH5350-40?
Instructions
Here is a look at the LSR molding process:
1. LSR A + B components typically come in a 5-gallon pail or
55-gallon drum. A process controlled pumping kit presses down on
the buckets to force the material into the static mixer and feed
into the injection unit.
2. Then, streams of pigment can be added and controlled. In the
injection, press material will be mixed together additionally with
a screw and pushed forward to create a “shot” of material, or the
amount needed to fill the mold.
3. After the material is injected into the mold, it will then stay
clamped together to cure the LSR. Then, either an operator or a
robot will remove the cured product from the mold and the cycle
repeats. It is a very quick efficient process that typically
averages 30 seconds.
Certificate
Rui-He RH5350-40® Liquid silicone rubber obtained the following test certificate: RoHS, FDA, REACH, PAHS, ISO9001:2016, etc.
Packaging & Storage
Available in 20kg pails or 200kg drums.
Store in a cool, dry place out of direct sunlight, use it within 12 months from the day of manufacture.
| Packaging Details | This kind of rubber is packed in 20kg/plastic barrels or 200KG/iron drum with an inside plastic bag. | |
| Port | HUANGPU GUANGZHOU | |
| Lead Time | 1 – 1000 (Kilograms) 1001 – 10000 (Kilograms) | 7 days 15 days |
Notice
This product cannot be contacted with compounds containing N, P, S to avoid affecting the catalytic effect of platinum.
If you need to know the prices of our silicone rubbers, please
contact us. We do not provide prices on the website because prices
fluctuate for many reasons.
