|
[China]
Trade Verify
Address: No.117 Fengshen Avenue, Xiuquan Street, Huadu District, Guangzhou,China
Contact name:Jacky
Guangzhou Ruihe New Material Technology Co., Ltd |
|
Verified Suppliers
|
|
|
Description
RuiHe LSR RH6250-30YH is two-component liquid silicone rubber for injection moulding proceses.
RuiHe RH6250-30YH can be used to produce medical technical articles with high transparency and excellent rubber elastic properties.
Application range: sealing elements, diaghragms, bellows, respiratory devices, vibration dampers, tube connectors, pipette nipples, cathters, parts for medical technical equipment, mats.
Typical Properties
RH-6250-30YH | |||
Properties | Unit | A | B |
Appearance | / | transparent | transparent |
Viscosity | mPa.s | 1200000 - 1800000 | |
Density | g/cm3 | 1.10 ± 0.02 | |
Shore A Hardness | A/JLS | 30 ± 2 | |
Tensile Strength | MPa | ≥ 7.0 | |
Elongation at break | % | ≥ 650 | |
Tear Strength | KN/m | ≥ 15 | |
Linear Shrinkage | % | ≤ 0.5 | |
Tensile set | % | ≥ 2.6 | |
Rebound | % | ≥ 45 | |
Compression set | (22 hrs at 175℃) % | ≤ 30 | |
These figures are for reference only, please contact us for details.
Typical properties of the vulcanisate:
The mixing ratio of components A: B = 1: 1.
Certificates
Rui-He silicone rubber obtained the following test certificate: RoHS, FDA, MSDS, LFGB, ISO9001:2015.
Packaging & Storage
Packaging Details | This kind of rubber is packed in 20kg/plastic barrels or 200KG/iron drum with the inside plastic bag. | |
Port | HUANGPU, GUANGZHOU | |
Lead Time | 1 – 1000 (Kilograms) | 7 days |
Store in a cool dry place out of direct sunlight, use it within 12 months from the day of manufacture.
Instructions
Here is a look at the LSR molding process:
1. LSR A + B components typically come in a 5-gallon pail or 55-gallon drum. A process controlled pumping kit presses down on the buckets to force the material into the static mixer and feed into the injection unit.
2. Then, streams of pigment can be added and controlled. In the injection, press material will be mixed together additionally with a screw and pushed forward to create a “shot” of material, or the amount needed to fill the mold.
3. After the material is injected into the mold, it will then stay clamped together to cure the LSR. Then, either an operator or a robot will remove the cured product from the mold and the cycle repeats. It is a very quick efficient process that typically averages 30 seconds.
Why Choose Us?
1. 15 years of manufacturing experience focus on silicone rubber
2. All Products shipped is Up to FDA, RoHS, Reach, LFGB, testing
standard
3. Overall quality controlling procedure and perfect service to you
4. Offer to tailor the order accordance with customer's requirement
in detail
5. 800 tons solid silicone rubber, 300 tons LSR silicone rubber and
200 tons silicone oil every month
6. Special organic silicon R&D team and precision inspection
instruments equipped
7. Automatic manufacturing equipment adopted, which ensure the
products shipped quality well largely
Notice
This product cannot be contacted with compounds containing N, P, S to avoid affecting the catalytic effect of platinum.
If you need to know the prices of our silicone rubbers, please
contact us. We do not provide prices on a website because prices
fluctuate for many reasons.
