Changshu Longteng Special Steel Co., Ltd. |
|
Mild Steel Copper Coated SG2 ER70S-6 CO2 MIG Welding Wire
DESCRIPTION:
ER70S-6 welding wire is a low alloy steel gas shielded welding
wire,protected with pure Co2 or Ar+CO2 gas.Stable arc,low
spatters,excellent fabrication weldability and lowsensitivity of
weld gas porosity can be obtained during welding.It is suitable for
all position welding especially with large welding current range.It
can show very good welding performance.
APPLICATIONS:
·Suitable for single-pass and multi-pass welding for structures
fabricated by carbon steel and 500MPa grade low alloy steel,such as
vehicles,bridges,construction and mechanical structures etc.
INSTRUCTIONS:
a. Suitable for using shielding gas at the speed of 20-25 liters
per minute.
b. Windshield must be set up in the welding zone,due to gas
porosity may be caused by strong wind.
c. Wire extention should be 10-20mm if the current range is under
300A and if above 300A,20-25mm.
Chemical Composition(%)
Chemical Composition | C | Mn | Si | S | P | Mo | Ti | Cu |
Guarantee Value | ≤0.10 | 1.40~ | 0.50~ | ≤0.025 | ≤0.025 | 0.20~ | ≤0.12 | ≤0.50 |
1.9 | 0.95 | 0.6 |
Test Item | Rm(MPa) | ReL/Rp0.2(MPa) | A(%) | KV2(J) |
-20℃ | ||||
Guarantee Value | ≥620 | ≥490 | ≥19 | ≥47 |
General Result | 660 | 545 | 25 | 103/111/121 |