Home Companies HCB Battery Co., Ltd

3.6v Fat 4000mAh ER18505 Lithium Cylinder Battery

Active Member

Contact Us

[China]

Address: No.1 Special Taizhong Avenue, Gaoqiao Industrial Park, Wujiashan Economic Development Zone, Wuhan, Hubei, China

Contact name:

HCB Battery Co., Ltd

3.6v Fat 4000mAh ER18505 Lithium Cylinder Battery

Country/Region	china
City & Province	wuhan hubei
Categories	Other Batteries

Product Details

High Voltage Lithium Batter 3.6v Fat A 4000mAh ER18505 Cylindrical Lithium Battery For Breeding Care And Animal Tracking

Nominal Capacity	4000mAh
Battery discharged at continuous current 2.0mA until voltage reaches cut-off voltage 2.0V at ambient temperature 23±2℃
Nominal Voltage	3.6 V
Maximum Continuous Current	150mA
Battery with minimum 50% rated capacity discharged at ambient temperature 23±2℃
Maximum Pulse Discharge Current	300mA
Battery with minimum 50% rated capacity discharged at max pulse for 3 seconds after 27seconds break. Ambient temperature 23±2℃
Storage Condition	Temperature ≤ 30℃ Humidity ≤ 75%RH
Operating Temperature	-55℃ to +85℃
Battery Dimension	See drawing on pag
Max Weight	31.0g
Self-discharge Rate	2%
Max self-discharged rate at ambient temperature 23±2℃
Shelf Life	10 years
Ambient temperature 23±2℃

1. Battery Characteristic

High Voltage
Nominal voltage up to 3.6 V
High Energy Density
Energy density up to 590 Wh/kg
Stable Operating Voltage
More than 90% of the capacity could be output at a stable voltage
Wide Operating Temperature Range
-55°C to +85°C
Long Shelf Life
Self discharge rate is less than 2% per year at room temperature
Glass-to-metal seal
Bobbin and spiral structure is available for different applications
Bobbin Benefits
Excellent safety record, high capacity
Typical Applications
Low power consumption & long shelf life equipment,
like calculator, industrial PC CMOS, memory support power, etc.

2. Lithium Thionyl Chloride (Li-SOCl2) battery has high energy density, and its nominal voltage is 3.6V. Bobbin structure is best suited for low current discharge and spiral structure is best suited for high current discharge.
Principle and Reactions:
The positive active material of Li-SOCl2 batteries is liquid Thionyl Chloride (SOCl2) and negative active material is Lithium (Li).

3. General Safety Instructions

Do not short circuit. If positive(+) and negative(-) polarity of a battery is directly connected this may cause a short circuit, e.g. This may happen in case of keys or loose coins in pockets. This can lead to toxic material or gas leakage and/or violent rupture.
When changing batteries be aware that batteries of different electrochemical system, grades, or brands should not be mixed. If different batteries are used or in case of using old and new batteries together this can discharge batteries due to different voltage or capacity. This can cause toxic material or gas leakage and/or violent rupture.
Do not solder the battery directly. In this case the battery can be damaged by the heat. This can cause short circuit and a toxic material or gas leakage and/or violent rupture.
Do not throw battery into open fire. This can cause violent rupture due to the heat.
Do not throw the battery into water. This can cause explosion.
Do not charge primary batteries. This can cause gas leakage and will lead to violent rupture and/or fire.

4. APPLICATION
Medical Instruments, Cash Registers, Alarms and security wireless devices, Mobile asset tracking, Electronic Meters (Water, Gas, Electricity), Automotive telematics, Vehicle tracking device, ETC (Electronic Toll Collection System), Intelligent Agriculture.
APPLICATION
Fully automatic cameras with flash and exposure meter, Lighting, Radios, Electronic locks, Medical equipment, Water, gas and electricity meters, Memory backup power sources.