Active Member
|
[China]
Address: Room 512, Building 4, Modern Service Industry Demonstration Base, Science and Technology Park, Huazhong University of Science and Technology, 3rd Road, Huagongyuan, Jiangxia District, Wuhan, China.
Contact name:Vic
Maxtor Energy Technology Development (Hubei) Co., Ltd |
|
|
KELONG Myria100KVA Three phase Online UPS
Intelligent Management
• Fault Trace Management (FTM) for convenient failure analysis
(waveform record before & after of the fault point for 200ms)
which easily figure out faulty point.
• 3 stage battery charging prolong the service life of batteries
• Intelligent battery management and mutiple setting, ±14~±24 pcs
batteries per string allow customers to get the faulty battery out
instead of replacing it
• Key components pre-alarm function which precaution the system
fault and remind service for key components, like capacitor, fan.
• Full asset management record the spare parts replacement,
timeline and service people.
User-friendly Interface
• User-friendly double physical ON/OFF button design to avoid false
operation.
• User-friendly graphical interface with Single-line mimic diagram
showing system status.
• Colorful 4.3" and 7" touch screen with LED Indicators, ensure
comprehensive and visualized information display.
• Multicolor LED bar allowing quick and easy detection of the
system status and simplified troubleshooting.
• Multi-language build-in display with Chinese, English,
French,Spanish,Italian,Polish, Russian,Korean.
High Reliability
• Wide input voltage and frequency range with high grid
adaptability and prolong battery life.
• Separate internal air channel which hot air drives directly
towards heat sink without distressing the PCB's and other internal
sensitive components, improving the components service life and UPS
reliability
• High overload capacity on inverter and bypass
• The most advanced and dual DSP control prevents single failure
point and increase performance.
• Intelligent fan control and redundant design: 15% load can be
driven when 2 fans fail and 40% load when 1 fan fails
• Integrated with input,output,bypass breaker and manual bypass
switch for better protection of system.
• All-round conformal coating to all PCB boards, protect
electronics from environmental effection and corrosion.
Green Power
• Advanced IGBT and three level technology, Low harmonic, high
efficiency, effectively energy-saving.
• High power density design, which small footprint on 100KW only
0.38m² for saving installation space.
• High input power factor up to 0.99 and low Input THDi: < 3.0%
at full load, much less grid pollution and costs
• AC/AC efficiency up to 96.5% and 30% load up to 95% efficiency
reduces heat dissipation and limits power consumption costs
• ECO mode efficiency up to 99.2% lead to significant cost
reduction
• W-ECO mode could reach 98.5% efficiency, THDi below 5% and
transfer time below 4ms to reduce TCO.
| MODEL | MY60 | MY100 | MY200 |
|---|---|---|---|
| INPUT | |||
| Voltage (Vac) | 380/400/415 (138~485 L-L) | ||
| Frequency (Hz) | 40~70 | ||
| Power Factor | ≥0.99 | ||
| Phase | 3φ4W+PE | ||
| THDi at full linear load | <3% | ||
| BYPASS | |||
| Bypass Voltage (Vac) | 380/400/415 | ||
| Voltage Range | +20% (-10/-15/-30 selectable)/+15% (10/20/25 selectable) | ||
| Overload | ≤130%: long run;130%< load ≤150%: 5min; 150%< load ≤200%: 1s; 200%< load≤300%: 100ms; >300%: immediately. | ||
| OUTPUT | |||
| Capacity (kW) | 60 | 100 | 200 |
| Power Factor | 1 (0.5 leading to 0.5 lagging) | ||
| Voltage (Vac) | 380/400/415±1% | ||
| Frequency (Hz) | 50/60±0.1% (Battery mode) | ||
| Phase | 3φ4W+PE | ||
| Three Phase Difference | ≤1% | ||
| Waveform | Pure sine wave, THDv<1% at linear load,THDv<3% at non-linear load | ||
| Transfer Time (ms) | 0 | ||
| AC-AC Efficiency | up to 96.5% | ||
| Overload | 101-105% Long run, 106-110% load for 60 minutes,111%-125% load for 10 minutes, 126%-150% load for 1 minute, over 150% load transfer to bypass | ||
| BATTERY | |||
| Battery Voltage (Vdc) | ±192(±168 ~±288 adjustable) | ±240(±168 ~±288 adjustable) | |
| Battery Type | External | ||
| Charging Current (A) MAX | 30 | 60 | |
| GENERAL | |||
| Communication Interface | RS232, RS485, MODBUS, dry contact( BMS,SNMP, expend dry contact card are optional in slot) | ||
| Display | 4.3" Touch screen+LED+LED bar | 7" Touch screen+LED+LED bar | |
| Alarm | AC input abnormal, low battery, overload, failure | ||
| Protection | Output short-circuit, overload, over-temperature, battery low voltage, output over/low voltage | ||
| Noise (dB) | <65 | <70 | |
| Altitude(m) | 0-2000 no derate. 2000-3000 m derate power by 1 % per each 100 m increase | ||
| IP | IP20 | ||
| Working Temperature (°C) | 0 ~ 40 no derate,40~50 auto derate. | ||
| Relative Humidity | 0 ~ 95%, no condensation | ||
| Dimension (W×D×H)(mm) | 400×960×1200 | 600×1000×1600 | |
| Weight (kg) | 145 | 161 | 312 |
