Home Companies Shenzhen O'CELL Technology Co.,Ltd

51.2V 200Ah 400Ah LiFePo4 Power Wall 5Kwh 10Kwh Home Energy Storage Battery

Shenzhen O'CELL Technology Co.,Ltd

Contact Us

[China] country

Trade Verify

Address: Industrial Park,No.1,Yayuan Road,Xiaoting District,Yichang City,Hubei Province

Contact name:Yao

Inquir Now

Shenzhen O'CELL Technology Co.,Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

51.2V 200Ah 400Ah LiFePo4 Power Wall 5Kwh 10Kwh Home Energy Storage Battery

Country/Region china
City & Province yichang hubei
Categories Batteries
InquireNow

Product Details

51.2V 200Ah 400Ah Power Wall 5Kwh 10Kwh Home Energy Storage Battery

  The 51.2V 200Ah battery system is applicable to home energy storage, small or medium sized shopping mall energy storage,which uses 32 pieces of 3.2V 100Ah battery cells in 16s2p configuration.Built-inSeplos smart BMS suppor tmaximumof 16packs of battery in paralleltoachieve high ercapacity.The system can not becon nected in series.And do not mixusea ocell battery with anyother battery brands or models.

  O'Cell is committed to providing high-quality solar inverter solutions that help to power a greener future. With its advanced technology,flexible design, and user-friendly interface, [Inverter Model] is the ideal choice for anyone looking to harness the power of the sun and make the switch to clean, renewable energy.

Solar Inverter Characteristics

1.C16-cell battery voltage sampling test, with deviation of ±20mV
2.Battery and ambient temperature detection: 4 battery temperature sensors, 1 ambient temperature sensor, and 1 MOS temperature sensor, with a deviation of ±2°C.
3.Battery capacity and cycles: Complete a full charge/discharge cycle to set the actual capacity. The remaining capacity of the battery is monitored with a capacity estimation accuracy within 5% deviation. Additionally, charge and discharge cycle times as well as full charge and discharge cycle times are configurable
4.Intelligent cell balancing: The charging and static balancing strategies can be set flexibly to effectively extend the service life.
5.Communication port: PC or smart front-end can monitor battery pack data, control operation and set parameters through commands such as telemetry, remote signaling, remote adjustment, and remote control. The communication protocol conforms to the requirements of YD/T 1363.3, and realizes cascade communication at the same time.
6.History data recording, saving and reading: Battery condition and alarm information will be recorded and save in real time when there is abnormality in the battery. A maximum of 500 history failure data can be stored.
7.Battery management system parameter setting: battery management system parameters, including cell battery over
voltage/under voltage, battery total voltage over voltage/under voltage, charge and discharge over current, battery high/low temperature, battery capacity, working mode, charge and discharge limit current, can be set in the battery monitoring system.
8.Working mode: charging and discharging current limiting, constant voltage output, direct output and other working modes can be set in the monitoring system
9.Multiple protection functions: hardware protection, battery protection, high and low temperature protection, output short circuit protection, etc.
Items
Specifications
Configuration
4P16S
Nominal Voltage(V)
51.2V
Working Voltage(V)
41.6V~58.4V
Nominal Capacity(Ah)
200Ah
Rated energy(kWh)
10.24KWh
Rated charge/discharge Current(A)
50A @25±2℃
Maximum charging current
100A@25±2℃
Maximum discharge current
100A @25±2℃
Working Temperature
0~40℃(Charge)
-10~40℃(Discharge)
Storage temperature and humidity
-10℃~35℃(Within one month of storage)
25±2℃(Within three months of storage)
Dimension(mm)
920×550×205mm
weight
95Kg±3kg
Cycle life
4800 cycles @25℃
50Acharge and discharge current 90% DOD
IP grade
IP 65
Communication mode
CAN&RS485
Altitude Limited(m)
0-3000m
Humidity(%)
5~80%

 

Q: Is it a super capacitor or battery?

A: It’s a combination of super capacitor and battery, which combines power density of super capacitors and energy density of batteries.

 
Q: Are you a trading company or manufacturer?
A: We are a professional manufacturer of super capacitor batteries. We promise all products are original and brand new.
 
Q: What is your delivery time?
A: Cells normally only take 1-3 days lead time; modules will take about 15-20 business days.
 
Q: How about your warranty?
A: Under standard operating condition, we guarantee no less than 20,000 time life cycles.
 
Q: Can you do OEM or ODM?
A: OEM and ODM are both acceptable. Please contact us for more details.
 
Q:Do you have a catalog?
A:Yes. Please contact us for catalog and latest price list.
 
Q: What kind of certificates do you have?
A: We can provide CE,MSDS,UN38.3 etc.

Q. Can I print my LOGO on it?
A: YES, LOGO/sticker/OEM/ODM welcomed

Hot Products

Deep Cycle LFP Battery 51.2V 100Ah 200Ah 300Ah Home Solar Power Storage Battery The 51.2V 200Ah ...
LiFePo4 51.2V Energy Storage Battery 100Ah 200Ah 300Ah 400Ah Lithium Iron Phosphate LifePo4 Battery ...
51.2V 200Ah 400Ah Power Wall 5Kwh 10Kwh Home Energy Storage Battery The 51.2V 200Ah battery system ...
LiFePo4 Battery 10kwh 15kwh 20kwh 200Ah Home Solar Energy Storage Stacked Battery The 51.2V 200Ah ...
LiFePo4 Pack 100Ah 200Ah 5KWh 10KWh 15KWh Battery Energy Storage Lithium ion Batteries The 51.2V ...
Lithium Ion Battery 18500 3.6V 2000mAh -40s℃ Low Temperature Battery In the process of cell ...