5kwh 48v 100ah Lifepo4 Battery Pack , Lithium Ion Phosphate Battery

5kwh LiFePO4 Battery Pack 48V 100Ah Lithium Iron Phosphate Battery

Application :

UPS System
Solar System.
Windy Power.
Emergency Systerm

Battery can be customized as your requirement

Pictures

Lithium Iron Phosphate (LFP or LiFePO4) :
Lithium Iron Phosphate - LFP - LiFePO4-cell
Lithium Ferro Phosphate technology (also known as LFP or LiFePO4), which appeared in 1996, is replacing other battery technologies because of its technical advantages and very high level of safety.

Due to its high power density, this technology is used in medium-power traction applications (robotics, AGV, E-mobility, last mile delivery, etc.) or heavy-duty traction applications (marine traction, industrial vehicles, etc.)

The long service life of the LFP and the possibility of deep cycling make it possible to use LiFePO4 in energy storage applications (stand-alone applications, Off-Grid systems, self-consumption with battery) or stationary storage in general.

Major advantages of Lithium Iron Phosphate:

Very safe and secure technology (No Thermal Runaway)
Very low toxicity for environment (use of iron, graphite and phosphate)
Calendar life > 10 ans
Cycle life : from 2000 to several thousand (see chart below)
Operational temperature range :up to 70°C
Very low internal resistance. Stability or even decline over the cycles.
Constant power throughout the discharge range
Ease of recycling

Life-cycle ofLithium Iron Phosphate technology (LiFePO4)
Lithium Iron Phosphate technology is that which allows the greatest number of charge / discharge cycles. That is why this technology is mainly adopted in stationary energy storage systems (self-consumption, Off-Grid, UPS, etc.) for applications requiring long life.

The actual number of cycles that can be performed depends on several factors:

Level of power in C-Rate
Depth of Discharge (DOD)
Operational environment : temperature, humidity, etc.
Below chart shows the estimated number of cycles for Lithium Iron Phosphate battery cells (LFP, LiFePO4) according to the discharge power and DOD figures. The test conditions are those of a laboratory (constant temperature of 25 ° C, constant charging power and discharge).

In standard environment, and for 1C cycles, we can get from the chart the below life cycle estimation for LFP :

2000 cycles at 100% DoD
3000 cycles at 80% DoD
8000 cycles at 55% DoD
It should be noted that following the number of completed cycle, the batteries still have a nominal capacity > 80% of the original capacity.