Home Companies Zhejiang Lisheng Spring co.,ltd.

Multy-turn wave spring with Plain Ends 17-7ph Carbon / Stainless Steel

Active Member

Contact Us

[China]

Address: Tang'aoyu Industry Zone,Liushi Town,Yueqing City,Zhejiang ,China

Contact name:Janet Liu

Zhejiang Lisheng Spring co.,ltd.

Multy-turn wave spring with Plain Ends 17-7ph Carbon / Stainless Steel

Country/Region	china
City & Province	zhejiang
Categories	Springs

Product Details

Multy-turn wave spring with Plain Ends 17-7ph Carbon / Stainless Steel

Description:

1.MultiWave springs are made of a single filament of round-edged, pre-tempered flat wire from a continuous coil. This results in uniform diameters and wave heights. They replace conventional round wire springs when space is critical, typically occupying only 1/3 to ½ of the compressed height space, while providing more deflection with the same load specifications. 

2.MultiWave springs should be used for all applications requiring tight load deflection specifications where axial space is critical.

Specification:

Part No.	Operates in Bore Diameter	Lears Shaft Diameter	Load	Work Height	Free Height	Waves	Turns	Thinkness	Radial Wall	Spring Rate
Part No.	mm	mm	(N)	mm	mm	Waves	Turns	mm	mm	N/MM
LM15-H1	15	10	80	3.2	5.18	3.5	3	0.25	1.47	40.4
LM15-L1	15	11	25	2.57	5.18	2.5	3	0.25	1.47	9.58
LMS15-M1	15	10	50	3.43	5.18	3.5	3	0.23	1.47	28.57
LMS15-H2	15	10	80	4.19	6.91	3.5	4	0.25	1.47	29.41
LMS15-L2	15	11	25	3.43	6.91	2.5	4	0.25	1.47	7.18
LMS15-M2	15	10	50	4.57	6.91	3.5	4	0.23	1.47	21.37
LMS15-H3	15	10	80	5.23	8.64	3.5	5	0.25	1.47	23.46
LMS15-L3	15	11	25	4.27	8.64	2.5	5	0.25	1.47	5.72
LMS15-M3	15	10	50	5.72	8.64	3.5	5	0.23	1.47	17.12
LMS15-H4	15	10	80	6.27	10.36	3.5	6	0.25	1.47	19.56
LMS15-L4	15	11	25	5.13	10.36	2.5	6	0.25	1.47	4.78
LMS15-M4	15	10	50	6.86	10.36	3.5	6	0.23	1.47	14.29
LMS15-H5	15	10	80	7.32	12.09	3.5	7	0.25	1.47	16.77
LMS15-L5	15	11	25	5.99	12.09	2.5	7	0.25	1.47	4.1
LMS15-M5	15	10	50	8	12.09	3.5	7	0.23	1.47	12.22
LMS15-H6	15	10	80	8.36	13.82	3.5	8	0.25	1.47	14.65
LMS15-L6	15	11	25	6.83	13.82	2.5	8	0.25	1.47	3.58
LMS15-M6	15	10	50	9.14	13.82	3.5	8	0.23	1.47	10.68
LMS15-H7	15	10	80	9.4	15.54	3.5	9	0.25	1.47	13.03
LMS15-L7	15	11	25	7.7	15.54	2.5	9	0.25	1.47	3.19
LMS15-M7	15	10	50	10.29	15.54	3.5	9	0.23	1.47	9.52
LMS15-H8	15	10	80	10.46	17.27	3.5	10	0.25	1.47	11.75
LMS15-L8	15	11	25	8.53	17.27	2.5	10	0.25	1.47	2.86
LMS15-M8	15	10	50	11.43	17.27	3.5	10	0.23	1.47	8.56
LMS15-H9	15	10	80	11.51	19	3.5	11	0.25	1.47	10.68
LMS15-L9	15	11	25	9.4	19	2.5	11	0.25	1.47	2.6
LMS15-M9	15	10	50	12.57	19	3.5	11	0.23	1.47	7.78

Hot Products

Standard of no ear Spiral External Retaining Rings No Mold Cost for shaft

Standard of no ear Spiral External Retaining Rings No Mold Cost for shaft Description: 1.Spiral ...

Multy-turn wave spring with Plain Ends 17-7ph Carbon / Stainless Steel

Multy-turn wave spring with Plain Ends 17-7ph Carbon / Stainless Steel Description: 1.MultiWave ...

Multi Turn Top Wave Springs with Plain Ends processing for mechanical seal

Multi Turn Top Wave Springs with Plain Ends processing for mechanical seal Description: 1.MultiWave ...

Multi turn top Plain Ends wave spring vs coil spring applications

Multi turn top Plain Ends wave spring vs coil spring applications Description: 1.MultiWave springs ...

MultiWave Springs Wave Compression Springs with plain ends calculation

MultiWave Springs Wave Compression Springs with plain ends calculation Description: 1.A wave spring, ...

Lisprings MultiWave Springs Wave Compression Springs 17-7ph steel

Lisprings MultiWave Springs Wave Compression Springs 17-7ph steel Description: 1.A wave spring, also ...