1,Vacuum,Spray& Chest - Connect small suction glass tube to the suction/spray hose; put the
hose to the suction port of machine, press the small hole on the
small glass tube, then machine is ready for suction operation.
- Connect spray bottles to the suction/spray hose; put the hose to
the spray port of machine, press the small hole on spray bottle
then the machine is ready for spray like mist.
- If you turn on the machine without vacuum force, belong to the
normal phenomenon, slightly etc. a short moment can immediately
recover normally. The vacuum force size adjustable stanza metals
knob, the agreeable hour hand is big
|
Ultrasonic - Before operation, clean face well with proper cream.
- Wash off the cream then steam face 10 minutes.
- Clear out the dirty for strengthen ultrasonic working.
- Spread shrink water o the face and tap it gently then wipe off it.
- Test skin conditions then spread the suitable medicine cream on the
face.
- Turn on the machine then adjust the power of probe to fit skin
well.
- Set timer to show 15minutes the normal work time.
- Press the button to choose type of wave shape out.
- Massage on skim covered medicine cream with probe.
- After over the operation, turn off the machine and clean the dirty
probe.
- If use the machine coming with the Chinese traditional medicine
mask powder, it will have better effect.
|
High-Frequency - Insert the Ozone electrode into the handle and keep touch well.
- Connect the plug to the power outlet then turn on the machine.
- Turn the button of energy lever to choose appropriate level
according to skin conditions and type then begin to operate.
- After over the operation, turn the button of energy lever to “O”
mark and turn off power, pull out the electrode and clean well and
dry storage.
|
Brush 1- Select appropriate brush and insert into the head .It will be
lock in place. When here a “ka” sound. 2-Turn switch “ON” Set speed according to client’s skin condition
and procedure. 3- The way to change brush: Turn switch “OFF” use a slight force to
pull off the brush. Insert another brush as needed turn switch“ON”.
4-Viscose sponges and warm water may be used to remove excess
treatment product from client’s skin. |