Active Member
|
[China]
Address: No.2, Lane 6, Langxia New Community, Bao’an District, Shenzhen
Contact name:Aiwen
Shenzhen Linquan Technology Co., Ltd. |
|
|
Fully Automatic Terminal Crimping Machine Wire Harness Terminal Crimping Machine Vibration Plate Terminal Crimping
Equipment function
1. It can process 36 different specifications and colors of wire and the amount of pin is unlimited
2. The whole machine has the function of twisting wire and sticking tin
3. With visual detection and pressure detection function
4. The maximum speed can reach to 1000pcs/H
Cutting Precision
It is based on a capacitive measuring principle, is integrated in
the blade holder and can be operated using any standard stripping
blade.
The sensitivity of the monitoring can be configured using setting
parameters. Defective wire ends are detected automatically and
rejected
Cutting length shorter than 100mm, error range 0.5mm+
Magnetic Levitation Linear Motor
Fast handling Speed
High position accuracy
Quiet,long service life, low maintenance cost
High precision inserting unit
Technical Parameters
| Mechine Function | Wire measuring cutting, Both-end soldering, Both-end crimping, Both-end Insertion, HOUSING feeder, Touch screen can debugging the crimping height, Discharge the defective product on-line inspection |
| Capacity | Both-end soldering, Both-end crimping, Insertion 1000PCS/H |
| Drive Mode | PLC Control |
| Wire Size | 0.13-6.0mm2 |
| Mould Assembly Type | Assemble AS40, AS42, AE30( Customized Acceptable) |
| Wire Cutting Length | 280-9999mm |
| Cutting Precision | ±0.5mm |
| Stripping Length | 1.0-15.0mm |
| Penetraction Depth | MAX 3mm |
| Crimping Capacity | 2 TON servo motor two sets mute specifications |
| Detection Device | Wire exists or not, wire overload, terminal exists or not, terminal overload, HOUSING exists or not, insertion exists or not, Terminal detection visual monitor, pressure sensor device |
| Power Source | 3 phase/380V/50Hz |
| Power | 7.5KW |
| Compressed Air | 0.5Mpa about 170NL/Min |
