Shenzhen Linquan Technology Co., Ltd. |
|
Automatic Terminalboth end Crimping Machine(short and fine wire)
Equipment Configuration
With the German high pixel image detection system
Equipped with high precision(Japan THK),cylinder(SMC),motor(MITSUBISHI) sensor(OMRON)
Equipment Function
1. Double camera shot visual inspetion
2. Discharge the defective and without crimping at A end
3. Pressure detection function at both A and B end
4. Discharge the defective ones and then fool-proof clipping
5. Adjust the crimping height on touchscreen
6. High speed, the maximum can reach 3200pcs/H
Equipment Function
Double camera visual inspection
Discharge the defective and non crimping one at A end
Pressure detection function at both A and B end
Discharge the defective ones and then fool-proof clipping
Adjust the crimping height on touchscreen
Technical Parmeters
Mechine Function | Fixed length cutting,Two ends(semi-striping,striping,crimping),stripping length/penetraction depth(crimping buffer structure),Terminal vertical delivery device, pre-feeding function |
Capacity | Both end crimping at about 3200pcs/hr(According to the different processing conditions,the speed will be different) |
Drive Mode | Mitsubishi SERVO Drive, IPC |
Wire Size | AWG30-AWG14 |
Mould Assembly Type | Assemble AS40, AS42, AE30(Pneumatic mould can be customized) |
Wire Cutting Length | 35-9999mm |
Cutting Precision | Cutting length<100mm,Error range 0.5mm+(Setup cutting length*0.002) |
Stripping Length | 1.0-15.0mm |
Penetraction Depth | MAX 3mm |
Crimping Capacity | 2 TON servo motor two sets mute specifications |
Detection Device | Air pressure decline, Wire exists or not, Wire overload, Terminal exists or not, Terminal overload, Stripping images detection, Terminal images detection, Pressure detection |
Power Source | Single-phase/220V/50-60Hz |
Power | 3.5KW |
Compressed Air | 0.5Mpa about 140NL/Min |
Equipment Size | L1510*W980*H1780mm |
Weight | 600KG |
Details
Processing samples