|
[China]
Trade Verify
Address: No. 937 Anji West Rd., Sanzao Industrial Park, Jinwan District, Zhuhai, Guangdong, China
Contact name:Tony
Zhuhai Easson Measurement Technology Ltd. |
|
Verified Suppliers
|
|
|
ES8A 2 Axis Milling Easson Digital Readout Linear Measurement Tool
Product Introduction
ES series DRO feature:
Ultra Low Temperature Rise Transformer
Easson all Digital readout power supply use a linear power
transformer and power filter, this can help our products pass by
the noice immunity and the EMC.
To reduce the total heat generation inside the DRO in order to
obtain long working life. An ultra low temperature rise transformer
that construct with very high permeability icron core is used,
which effectively bring temperature rise to only about 5℃.
EMC Testing equipment
To Make sure all Easson DRO products can be pass the standard EMC
standard specification, we have a complete set of EMC test esd
immunity tester equipment for testing the EMC.
Easson DRO have been to conforms to relevant standards for the
electromagnetic compatibility ( EMC ) as the details below:
IEC61000-4-2 / GB / T 17799-2: Electrostatic discharge immunity (
Contact discharge 6000V, air discharge 8000V )
IEC61000-4-4 / GB / T 17799-4: Electrical fast transient burst
immunity ( pulse amplitude 2000V )
IEC61000-4-5 / GB / T 17799-5: Lightning surge immunity (
Superrimposed pulse voltage peak 2000V )
Aging Test Room
.
All Easson Digital Readout System need to do the aging test, using
3 axis signal generator counting, make sure all couting reading
correctly, high temperature test and load test for 72 hours before
QC procedure.
Technical Specification
| Model Name | ES-8A | ||
| Axis number | 2 Axis | ||
| Axis Display | 0.1μm, 0.5μm, 1μm, 5μm | ||
| Signal Input | TTL | ||
| Voltage Range | AC 110 V - 220 V | ||
| Net Weight | 3 kgs | ||
Input frequency | 2 MB Hz | ||
| Operation Keyboard | Light touch buttons | ||
| Operating temperature | 0℃ - 45℃ | ||
| Storage temperature | -40℃ - 55℃ | ||
| Relative humidity | ≤ 95% | ||
| Inputs | 2 Optical glass scales | ||
| EMC Standard | IEC61000-4-2 / GB / T 17799-2 | ||
Basic parameter is included as below:
| Centering (1/2) |
| Metric / inches Display (mm / Inch) |
| Absolute / incremental (ABS / INC) |
| Power off Memory (30 subdatum) |
| 199 subdatum |
| Reference Memory (REF) |
| Zero |
| Pitch Circle Diameter (PCD) |
| Line Hole Positioning (LHOLE) |
| Simple “R” Function |
| Smooth “R” Function |
| Linear Error Compensation |
| Non Linear Error Compensation |
| INCL Function |
| Axis Speed Display |
Connector interface
| PIN | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
| TTL Signal | --- | 0V | --- | GND | --- | A | 5V | B | R |
| Cable | --- | Orange | --- | Ground | --- | Yellow | Red | Green | Brown |
FAQ
1. Q: Did you accept OEM customized service?
A: Of course, we can provide not only typical products but also the products customized to customer's request based on the order quantity.
2. Q: What is your company mainly produce?
A: We are mainly produce Vision Measurement Machine, Optical Profile Projector, Digital Readout System(Counter), Linear encoder glass scale.
3. Q: Delivery time
A: Sea freight order normally is 30 days after receive the order
comfirmation, small quantity for air freight is available to ship
anytime.
4. Q: Payment term
A: Normal accept 100% T/T payment, for others payment terms, please
contact us.
