|
[China]
Trade Verify
Address: Fengneng Road,Huishan District,Wuxi City
Contact name:Feng
Wuxi Arta Precision Technology Co.,Ltd. |
|
Verified Suppliers
|
|
|
Description :
1.A magnetic induction hydraulic cylinder uses a proximity sensor that detects signals through magnetic sensing.
2.The proximity sensor is located on the surface of the cylinder tube and detects a signal from a magnet embedded in the piston.
3.The position of the proximity sensor's signal is determined by the location of the proximity sensor on the cylinder tube.
4.This makes it easy to set up and align the sensor, saving time during the design and assembly processes.
5.The external dimensions of the MGHC inductive cylinders are the same as HC tie-rod cylinders, making them interchangeable in certain applications. This allows for easy replacement or upgrade of existing cylinders without modifing the related equipment.
Overall, the use of a magnetic induction hydraulic cylinder with a proximity sensor provides accurate and reliable position sensing, which is essential in many industrial applications.
What are hydraulic cylinders made up of?
Hydraulic cylinders are typically constructed from durable materials to withstand the forces and pressures they encounter. Common materials include:
Cylinder Barrel: This part is often made of seamless steel tubing, providing strength and resistance to wear.
Piston: Pistons are usually made of materials like steel, aluminum, or cast iron. The choice depends on the specific application and the required strength.
Piston Rod: Similar to the cylinder barrel, piston rods are commonly made of high-strength steel to handle the tensile forces during operation.
Seals: Hydraulic cylinders incorporate various seals to prevent leakage of hydraulic fluid. These seals are often made of rubber or other elastomeric materials.
End Caps and Mounting Components: These parts can be made of metals like steel or aluminum, providing structural support and allowing for the attachment of the cylinder to other components.
The choice of materials depends on factors such as the application, load requirements, and environmental conditions. It's all about finding the right mix of strength, durability, and compatibility with the operating environment.
External dimensions:
| MGHCA-SD double acting,basic | MGHCA-SD double rods,basic |
 |  |
 | |
| with bellow (MGHCAH) | with heat/erosion proof(MGHCAJ) |
specifying the needed material while ordering 1) N:NBR 2)V::≤200℃ | 80℃≤temperature :≤200℃ .
|
Order Form
MGHC-A--70-- H --FA--C--80X100--B-- Y -- 25mm -- 1 -- Tn -- A -- B -- 1
1 2 3 4 5 6 7 8 9 10 11 12 13 15
| MGHC:Inductive Tie-Rod Cylinders | |
| 1) Type | A:doubling acting C:double rods |
| 2)Working pressure | 70:70kgf/cm² 140:140kgf/cm² |
| 3)Performance blank:(standardusage) | H:with bellow (note:"space"if not be used) |
| 4)Mounting type | SD/FA/FB/CA/CB/LA/LB/TA/TC |
| 5)Rod size | C: C class B:B class
note: 1.standard:HC-70+C class rod
|
| 6)Tube Bore(mm) | 32,40,50,63,80,100,125,150,180,200,224,250 |
| 7)Stroke(mm) | Max.stroke=Max length of stroke-Min. length of stroke |
| 8)Cushion blank: | 1)space:no cushion
2)B:Cushion on both ends
3)R: Cushion on rod cover
4)H:Cushion on head cover |
| 9)Connectors Y | 1)Y :Yconnector 2)I:Iconnector |
| 10)Stroke alignment | only forward alignment and aligned length < or =stroke length |
| 11)Spec. | (1)JFS-01 (2)JFS-01CC (3)JFS-01AA (4)JFS-01BB
|
| 12)Sensor and quantity | 1) T:2 wires,2meters P:PNP3 wires,2meters N:NPN3 wires,2 meters 2)n:quantity |
| 13)Port position | NBR(standard usage),2: PU 3:FPM |
| 14)Cushion position | |
| 15)Packing | 1) 1:PU(Standard usage) 2) 2:NBR 3) 3:FPM |
Proximity setting
Using bracket Using band
■While piston moving forward,A postion to activate, the distance between A and
B is called"active sensing area'
■While piston moving backward from A position to C position,sensing is still "on", the distance
between A and C is called"sensing difference.
Cushion length
 | Bore(mm) | L | l |
| 32--63 | 20 | 10 | |
| 80--160 | 25 | 15 | |
| 180--224 | 30 | 27 | |
| 250 | 35 | 32 |
The application not only for production mechanical machine tools and metal
processing equipment, but also can be widely used in actuators of
steel, nuclear power plant control, passenger elevators, etc
| Type | Symbol | Drawing | With Bellow | Heat Proof | Bore(mm) |
 |
| 32,40,50,63,80,100, 125,150,180,200,224, 250 | |||
| Double acting | HCA |  | HCA-H | HCA-J | |
| Double rod | HCC |  | HCC-H | HCC-J | |
| Double rods with alignment | HCD |  | HCD-H | HCD-J |
Factory:
FAQ
Q1: Are you a manufacturer or a trading company?
We have our own factory, so we can provide the best price as well
the first service.
Q2: Do you accept customization or Non-standard products?
Yes, we can customize products as the customers required.
Q3: What is your MOQ?
MOQ depends on our clients needs. Besides, we welcome trial order
before mass production.
Q4: How long is your delivery time?
Normally, the delivery time is 7 days if we have stock. If we don't
have stock, it needs 15-30 working days. And it also depends on the
quantity and requirements of products.
Q5: What are your payment terms?
T/T. If you have any questions, please feel free to contact us.
