Results forlinbo3 wafer 4from 109 Products.
|
|
Product Description: 8-inch LiNbO3 wafers refer to the specific size of LiNbO3 crystal substrates commonly used in the fabrication of optoelectronic devices and integrated circuits...
|
|
|
|
|
LiTaO3 LiNbO3 Wafers LN LT Thin Films Wafers 42°Y LT & LN Wafer The basic principle of SAW devices is the generation of elastic surface waves from electrical signals and their ...
|
|
|
|
|
SAW Grade LiNbO3 Crystal LiNbO3 crystal combines low cost, good mechanical and physical properties as well as high optical homogeneity. Therefore, LiNbO3 wedges have been widely ...
china
|
|
|
|
|
6 Inch LiTaO3 LiNbO3 Wafer Black Polarized For SAW / BAW Applications 128 Degrees Y Z-Cut Lithium niobate (LiNbO3) single crystal is a ferroelectric crystal with high electromechan...
|
|
|
|
|
Product Description: Single Wafer Container This wafer container is specifically designed for 1~12 inch diameter wafers. Made of high quality polypropylene, it offers excellent ...
china
|
|
|
|
|
Good Physical And Mechanical Properties LiNbO3 Commonly Used Material For Pockels Cells, Q-Switches Product overview: LiNbO3 Crystal is widely used as frequency doublers for ...
|
|
|
|
|
Description LiNbO3 Crystal is widely used as frequency doublers for wavelength > 1mm and optical parametric oscillators (OPOs) pumped at 1064 nm as well as quasi-phase-matched (QPM...
|
|
|
|
|
Pyroelectric Free Black LiNbO3 Wafer 128Y-Cut SAW Grade The reduction technique is used to produce black lithium niobate (LiNbO3). Black LiNbO3 wafer has a high ability to ...
|
|
|
|
|
Black Pyroelectric Free LiNbO3 Wafer 8 Inch 128Y-cut SAW IDT Application Lithium Niobate (LiNbO3) is a ferroelectric material suitable for a variety of applications. Its versatilit...
|
|
|
|
|
4 inch Diameter LiNbO3 Wafer 0.25mol% Er dope or 5mol% MgO dope for Optical Applications LiNbO3 (LN) crystal has stable physical, chemical and mechanical properties, high ...
|
|
|
|
|
3inch dia76.2mm Lithium tantalate LiTaO3 lithium niobate LiNbO3 wafer substrates, Black LT and LN wafer for saw,3inch, 4inch,6inch LiTaO3 wafer Piezoelectric Crystal Lithium ...
|
|
|
|
|
4 inch Diameter LiNbO3 Wafer 0.25mol% Er dope or 5mol% MgO dope for Optical Applications LiNbO3 (LN) crystal has stable physical, chemical and mechanical properties, high ...
|
|
|
|
|
Large Dia 6'' 8'' LiNbO3 wafers 128°Y Z-cut For Surface Acoustic Wave Devices Lithium niobate (LiNbO3) single crystal is a ferroelectric crystal with high electromechanical ...
|
|
|
|
|
Large Diameter 8 inch LiNbO3 wafers 128°Y-cut and Z-cut For Surface Acoustic Wave Devices Lithium Niobate (LiNbO3) is colorless or slightly yellowish translucent crystal, with R3C ...
|
|
|
|
|
X-cut and Z-cut LiNbO3 wafer 8 inch Large Size For Optical Use Lithium niobate is transparent between 0.25 and 5.3 μm. It can be used in visible, near IR and middle IR region. It ...
|
|
|
|
|
Y128-Cut 4 inch 0.5mm LiNbO3 Wafer DSP pack in Cassette Lithium Niobate (LiNbO3, LNO), an uniaxial ferroelectric with a very high Curie temperature (1500 K). Among other attractive ...
|
|
|
|
|
Ra Roughness 1nm LiNbO3 Wafer used in Visible, Near-Infrared and Mid-Infrared Regions Lithium niobate is transparent between 0.25 and 5.3 μm. It can be used in visible, near...
|
|
|
|
|
Ferroelectric LiNbO3 Wafer 4inch 6inch For SAW Devices Lithium Niobate (LN) is a ferroelectric material with excellent electro-optic, nonlinear, and piezoelectric properties. ...
|
|
|
|
|
Ferroelectric LiNbO3 wafers of different Orientations For SAW Devices Optical Waveguides Lithium Niobate (LN) is a ferroelectric material with excellent electro-optic, nonlinear, ...
|
|
|
|
|
Roughness Ra 1nm Customized LiNbO3 Wafer in 4'' 6'' 8'' doped Optical grade or SAW grade Lithium niobate is transparent between 0.25 and 5.3 μm. It can be used in visible, near IR ...
|
|
|
You may also be interested in :
