Active Member
|
Address: Block C, Building 2, HongPai Ind Park, Tianfu Road, Xinhe Sub-district, Fuyong Town,
Contact name:
Shenzhen Lixiang Energy Co., Ltd |
|
|
Brown 3.7V 5200mAh Heated Motorcycle Gloves Battery Pack with 4-Temperature Settings
A: Parameter:
1,Nominal Voltage:3.7V
2,Model:L X-DRF03M/ LX-DRF03H
3,Working Voltage:3V-4.2V
4,Nominal Capacity:4400mAh/ 5200mAh
5,Charge Cut-off Voltage:4.2V
6,Charge Current:1 A
7,Standby Current:≤15μA
8,Max. Output Power:15W MAX
9,Operating Efficiency:≥99%
10,Loading Resistance:5Ω-200Ω
11,Charge Method:CC/CV-Constant Current/Constant Voltage
12,Charge Temperature:0℃—40℃
13,Discharge Temperature:-20℃～+60℃
14,Charge Duration:1-3hrs(Standard)
15,Cycle Life Time:Above 500 cycles
16,Power Self-Consumption:7.5-14.2uA
17,Internal Impedance:PCB Internal Impedance<80mΩ, Battery Internal Impedance <180mΩ
18,Output Terminal:DC/1.35*35mm ,DC: 7mm
B. Protection Fuctions:
The battery has the overcharge, over-discharge, over-current, over-voltage, short-circuit and temperature protection functions
1,Overcharge detection voltage: 4.25v±25mV /Cell
2,Overcharge release voltage: 4.13v±50mV /Cell
3,Over-discharge detection voltage: 2.4v±50mV/Cell
4,Over-discharge release voltage: 2.9v±50mV/Cell
5,Charging /Discharging Over-current detection current: 2.7A—4A
6,Recommended load: 5Ω-200Ω
7,When the temperature reach to 65-75℃, the temperature protection is started, and the battery is power off.
C. Power Indication:
Press the black button(Power) to check the power level:
1 LED blinking : Remaining Capacity<=20%
1 LED light: Remaining Capacity <=40%
2 LED light: Remaining Capacity <=60%
3 LED light: Remaining Capacity <=80%
4 LED light ; Remaining Capacity <=100%
Remaining Capacity | Button | LED① | LED② | LED③ | LED④ |
80%～100% | ↓ | ● | ● | ● | ● |
60%～80% | ↓ | ● | ● | ● | ○ |
40%～60% | ↓ | ● | ● | ○ | ○ |
20%～40% | ↓ | ● | ○ | ○ | ○ |
0%～20% | ↓ | ●|○Blink | ○ | ○ | ○ |
D. Output:
Constant power output: Press the black button for2 seconds to power on
1. The ④LED light in green color means the output power is About 100% of full output power
2.Press the black button again, the ③LED light in green color means the output power is About 75% of full output power
3.Press the black button again, the ②LED light in green color means the output power is About 50% of full output power
4.Press the black button again, the ①LED light in green color means the output power is About 25% of full output power
5.Press the black button again, the LED is off, and the power output also is off.
Output Power | LED④ | LED③ | LED② | LED① |
100% | ○ | ○ | ○ | ● |
75% | ○ | ○ | ● | ○ |
50% | ○ | ● | ○ | ○ |
25% | ● | ○ | ○ | ○ |
0 | ○ | ○ | ○ | ○ |
When the battery is being charged, the LED flash from①to ④, after fully charge, 4 LED flash altogether.
