Salt fog spray equipment S-010

Model S-010
Internal dimensions (mm) 850*1300*600
Overall dimensions (mm) 1250*2000*1550
Technical structure
Temperature range Ambient ～60℃
Humidity range 95% ~ 98% RH
Temperature fluctuations ± 0.5 ℃
Temperature deviation: ± 2.0 ℃
Test time 1~999 hours, settable
Spray deposition 1～2ml / 80cm2 • h
Spray type Continuous / Periodic
Control system
Temperature Controller LED display, P.I.D+S.S.R. microcomputer integrated controller
Programmable Touch Screen control (Optional)
Temperature sensor Platinum resistance. PT100Ω / MV A-class
Spraying time 1~99 hours, settable
Salt fog collected With standard funnel and metering cylinder
salt water filtration • With water filter near the suction tubes( Avoid the nozzle blockage)

FEATURES:

1. Salt water preheating The temperature for salt water should be equal with workroom temperature
Spraying system Tower spray and nozzle without crystallization(Fog is more fine and uniform distribution)
Material
2. Material Glass fiber reinforced plastics; (corrosion resistance, Anti-aging, high strength)
Interior material Glass fiber reinforced plastics; (corrosion resistance, Anti-aging, high strength); P. P high temperature resistance also
3. Standard configuration round bar / 1 piece; sample holder / 1 piece; spray nozzle / 2 pieces; funnel / 2 pieces; metering cylinder / 2 pieces
4. Safety device Humidifier dry-combustion protection, independent over-temperature protection, water shortage protection, over-current protection, refrigerant high-pressure protection switch, over-current circuit breaker, earth leakage protection and so on.
5. Sealing Water seal structure, no salt fog overflow
6. Standard ISO 3768/3769/3770, DIN50021-75, ASTM B-117, JIS H8502, IEC 68-2-11,IEC68-2-52, MIL-STD-750,IEC-68-2-11, ISO 9227

Power Supply AC380V 50HZ