Super Wear Resistant Acid Fracturing Hose High Speed Transportation Of Abrasive Materials

In order to withstand the test of ultra-deep wells, ultra-high pressure, high wear drilling conditions, high temperature difference, strong wind and sand and other harsh environments, the R&D team of Litong Technology has deepened the research of basic geological theory, researched new technologies suitable for shale oil and gas exploration and development, and through innovative production Process and material ratio selection, developed and produced LT301F super wear-resistant acidized fracturing hose. The hose uses UHMWPE imported from Germany as the inner layer of the hose, and 4 to 10 layers of super high-flexible steel wire/steel rope are used as the pressure-bearing skeleton material to solve the problems of high pressure, corrosion and wear in the development of ultra-deep oil and gas drilling and production. , Which greatly reduces the replacement frequency of the hose assembly and prolongs the service cycle of the hose. This series of hoses has the following remarkable features:

Application:flexible line using for delivery water-based, oil-based, acid-based and foam fracturing fluids under high pressure in acid, sand and hydraulic fracturing works

Tube:UPE

Reinforcement:4 or 6 layers of high tensile super flexible spiral steel wire or steel cable

Cover:abrasion and weather resistant synthetic rubber

Temperature Range:-20°C~+82°C (-4°F〜+179.6°F)

Standard:API Spec. 7K FSL0 | ABS

Connectors:integral union or integral flange

Full flow: larger diameter and faster flow, helping to increase production efficiently;

Super wear resistance: high pressure conveying emery, the choice of sand fracturing quality, can wear 8000 hours;

Acid and alkali corrosion resistance: UHMWPE lining imported from Germany/Japan can withstand 28% hydrochloric acid, and transport acid-based fracturing fluid without pressure;

Resistant to ultra-high pressure: working pressure up to 20000Psi (about 138MPa), burst pressure up to 40000Psi (about 276MPa), high fracturing efficiency, ensuring safe operation.

Parameter

PRESSURE LEVEL	I.D.	O.D.	W.P.	P.P.	Min.B.P.	Min.B.R.
psi	in.	mm	psi	psi	psi	mm
10000 Grade E	2	79	10000	15000	22500	1000
	2 1/2	98	10000	15000	22500	1000
	3	117	10000	15000	22500	1400
	3 1/2	137	10000	15000	22500	1400
	4	156	10000	15000	22500	1600
15000 Grade E	2	98	15000	22500	33750	1200
	3	129	15000	22500	33750	1500

 

Welcome to LETONE

From 2003, Letone has always been committed to manufacturing rubber hose for 14 years, which provides high-grade and high-end rubber hose for the field of spaceflight and maritime industry, petroleum industry and highway, and PLA etc. Just as careful and elaborate rubber hose, LETONE has now become a high-tech enterprise integrating research, production, sales and services after years of steady development, shining brilliantly in the international market as an iconic enterprise among China's rubber hose.

More about LETONE

80,000 m2 of Production Bases

By 2016, Letone has built 4 world-class manufacture bases which cover a total area of over 80,000 m2, and accomplished an annual production value of RMB 5 billion.

More about Production Strength

Globalization & Localization

To offer you more timely service and solve your puzzles during operation of production lines, we push out the strategy of "Globalization & Localization". Currently, we have set 4 overseas offices distributed over different continents. If there is any need, we can "knock your door" at once. It is a strategy just right for you.

Searching Overseas Offices

What Do We Do?

From the clear service list, you can accurately know about which services Letone will providefor you…

More about Businesses

Service You Can Rely On

Service is the soul of a brand. So, LETONE integrates service into each segment of the life cycle of every order from pre-sale, in-sale until after-sale, and offers "consultancy" and "manager" service.