Home Companies Chongqing Leeb Instrument Co.,Ltd

Uee923 Three Calibration Magnetic Paint Thickness Gauge CE FCC Certified

Active Member

Contact Us

[China]

Address: High&New Technology Industrial Park, Yubei District, Chongqing, China

Contact name:Leeb Team

Chongqing Leeb Instrument Co.,Ltd

Uee923 Three Calibration Magnetic Paint Thickness Gauge CE FCC Certified

Country/Region	china
City & Province	chongqing chongqing
Categories	Electric Wrenches

Product Details

Uee923 Three Calibration Magnetic Paint Thickness Gauge CE FCC Certified

High Precision Build-In Thermal Printer Three Calibration Paint Coating Thickness Gauge

Features & Functions

● All products like Uee923 are CE, FCC certified & manufactured according to ISO 9001.

● It can work continuously for ten hours due to the rechargeable lithium ion battery
● The Large memory can save 4 kinds of materials and 1560 test values.
● Uee923 provide three kinds of easy calibration ways as below:

(1) by one specimen (2)two specimens (3) five specimens

● Uee923 has software to connect PC for data transmission, analysis, and printing measurement reports.

● It is convenient because of the built-in thermal printer(Width of printer paper: 56.5±0.5mm).

● Uee 923 has five kinds of statistics: Average, Maximum, Minimum, Testing times, Standard deviation.
● As the leading manufacturer, we support 3 years warranty and life-long services.

Technical Parameters

Technical Parameters
Model		Uee923
Measuring principle		Magnetic induction (Fe ) & Eddy current ( NFe)
Measuring range (µm)		0~1250μm
Accuracy		±(1%H+1) μm; H refers to the thickness of testing piece
Minimum resolution (µm)		0.1μm
Min curvature of the min area (mm)		Convex1.5 Concave9
Diameter of the min area (mm)		Φ7
Critical thickness of substrate (mm)		0.5
Operating temperature		0℃~40℃
Memory		1560
Dimensions		2389038mm
Weight		420g
Printer		Build-in High-speed Thermal Printer
Power supply		Rechargeable Li-ion battery
Standard Configuration		Main Machine, probe1(Fe or NFe), substrate1(Fe or NFe), software & USB, Calibration specimens*5, Users’ Manual, Qualified Certificate, Paper for Printer, Power Charger, Packing list, Warranty card
Optional Accessories		Probes, Specimens, Paper for printer

The Rules when using the instruments

a) The characteristics of substrate

Standard methods for magnetic substrate of magnetic properties and surface roughness should be similar to the magnetic properties and surface roughness of specimens substrate.

For eddy current method, the standard substrate of electrical properties should be similar to the electrical properties of specimens substrate.

b) The thickness of substrate

Check whether the thickness of the substrate is lower than the minimum thickness, if not, can use one of method in 3.3 to calibrate.

c) Edge effect

Should not be in the specimen shape changing places, such as edges,holes, and the place such as Angle measurement.

d) The curvature

Should not be in curved surface measurement of the specimens.

e) Measurement and measured times

Usually as a result of the instrument measurement result is not the same each time, so we must in every area from several measurement

results.Coating thickness and surface rough degree of local differences, require at any repeated measurements in a specific area.

f) Surface cleanliness

Before measurement, should remove any attached on the surface of a material, such as dust, grease and corrosion products, but do not remove any covering material.

5 calibration specimens: 48.5μm,99.8μm,249μm,513μm,1024μm