DLC5.1 Power Selectable 2x2 2x4 LED Troffer Lights Surface Mounted

Features

• CRI>80, CCT Tunable, 3000K, 3500K, 4000K and 5000K
• CCT and Power Tuanable LED Troffer Light Minimize stock, 1 SKU can cover max. of 16 models.
• An auxiliary to connect low voltage sensor/BLE or other IOT network.
• 2 Depth Design: Super Thin & Standard
• DLC5.1 Premium LED Troffer Light 5-100% 0-10V dimmable, flicker free, Dim to off.

CCT and Power Tuanable LED Troffer Light Specification

Accessories

BI-LEVEL 12V PIR SENSOR/PIR SENSOR WITH DAYLIGHT HARVESTING

Specification

• Input: 12-24VDC, >8ma
• 0-10V DC output signal
• Memeory function with one bottun commissiong.
• IR Remote controller commission.
•  Detecton Range: Max. 6m in diameter.
• Mounting Height: 3-4m.
• Optional Daylight Harvesting

Sensitivity: 100%/25%, 50%, 75%, 100%Default Setting/Setting

• Daylight Sensor: Disable/Ambient Learn, 2lux, 10lux, 25lux, 50lux, 100lux, 300lux, Disable
• Hold Time: 5min/30s, 90s, 5 min, 10min, 30min
• Twilgith Time: never turn off/10s, 5min, 10min, 30min, 1h, never tun off
• Twilight Level: 30%/off, 10%, 30%, 50%

MICROWAVE MOTION SENSOR

Sensitivity: 25%, 50%, 75%, 100%Default Setting/Setting

• Daylight Sensor: Disable/Ambient Learn, 2lux, 10lux, 25lux,50lux, 100lux, 300lux, Disable
•  Hold Time: 3s, 30s, 90s, 5min, 10min, 30min
• Twilgith Time: 10s, 5min, 10min, 30min, 1h, Infinite
•  Twilight Level: Off, 10%, 30%, 50%

Specification

• 5.8Ghz C-Band Microwave.
•  Input Voltage: 12 - 24V DC.
• Input Current:≥25ma.
•  *1~10V DC. Output Signal.
• Super Compact, Flexible To Be Integrated Into Any Suitable Fixtures.
• Dual-processor Technology, Real Lux-off & Daylight Monitoring Function For Built-in Application.
•  Memory Function With One Button Commissioning, Easy Operation And User Friendly.
• IR Remote Commissioning, Easy Setting And User Friendly.
• Detection Range Up To 12min Diameter.
• Mounting Height: 3~6m.
• Operation Temperature: -20°c~+ 70°c.
• RoHS Compliant.

*Sink Current: Max.100mA

4W OR 8W UL LISTED EMERGENCY BACKUP

•  Listed for field Instllation-UL924 & CSA C22.2 NO. 141
• Input: 120-277VAC/347VAC 50/60Hz
• Output: 25-50VDC, 8W or 15W
• Illumination Time: 90min
• Battery Type:Li-ion/Ni-MH
• Battery Recharge Time: 24Hrs
• Surge Protection: 3KV
• Protection:
• Input over-current Protection (Fuse)
• Output over-voltage Protection
• Output Low Voltage Protection
• Output Short Circuit Protection
• Working Temp.: 10℃ to 50℃

Advantages

HOW TO CHANGE THE WATTAGE & CCT IN THIS FIXTURE

CCT and Power Tuanable LED Troffer Light Installation

Suitable for surface mounted, suspended mounted.

WARNING

INSTRUCTION FOR SURFACE MOUNTING

TR - SL/F

·1.Disconnect or turn off power before installation,see step ①.
·2.Put the new volumetric troffer fixture onto the T grid,see step②
·3.Make the electrical connection to the fixture in accordance with local electrical code.Make all necessary wiringconnections,observing proper voltage and polarity.See step@ . Make sure the power feeds are put into the fixturejunction box.
·4 Once finished with the electrical connection, bend the earthquak clips to attach to the T grid.See step④
·5.Turn on power, the fixture will illuminate. See step .

TR - SLK

·1.Disconnect of turn off power before installation. See Step 1
·2.Remove the old lens, fluorescent tubes and ballast (if necessary) from fixtures. See Step ②

·3.Insert these brackets between the T grid and old fixture housing. Seet Step ③
·4. Fasten screw and hang the LED troffer retrofit from the bracket.See Step ④ Screw the safety cables to theold fixture housing. See Step ⑤
·5.Make the electrical connection to the fixture in acccordance with local electrical code.Make all necessaryconnections, observing proper voltage and polarity. See Step⑥
·6.Once finished with the electrical connection, swing LED troffer retrofit so it sits flush, then using the hooks onthe opposite end of the brackets secure retrofit into place.See Step⑦
·7.Turn on power, the fixture will illuminate. See Step ⑨