Active Member
|
[China]
Address: Room A102, Building A, West Electronic Community No.181 South of Taibai Road, Hi-Tech Zone,Xi'an, 710061, China
Contact name:Jason
Xi'an Razorlux Optoelectronic Technology Co., Ltd. |
|
|
1.High Efficacy low decay 700MA LED chip
2.High heat transmit die cast housing ADC12 aluminum, patent
design, IP68
3.Shock and vibration resistant tempered glass, super clear 95%
light transmit rate
4.Anti-glare.Scientific optical reflector design, making the light
more focus,even, comfortable for eyes
5.Original Bridgelux LED source,high luminous efficacy and long
lifespan
6.MEANWELL HLG series driver, the highest level of MEANWELL driver
7.Surface treatment-Powder painted, salt resistant and chemical
resistant, also hard for dust to accumulate on the surface
8.2.0mm aluminum PCB with heat index 2.5, keep LED working under
cool temperature
9.Working temperature: -30ºC to 50ºC.
ITEM NO. | RLEP-J40 | RLEP-J100 | RLEP-J200 |
TOTAL POWER | 30w | 100w | 185w |
Replace HPS | 150w | 300-350w | 700-1000w |
Dimension | 200*200*270mm | 300*300*175mm | 400*400*185 |
Weight | 4KG | 7.5KG | 12KG |
Reflector/ wide angle | 120 | wide angle | wide angle |
Nominal lumens | 3480lm | 11600lm | 20880lm |
Driver Current | 350mA | ||
# OF LEDS | 24 | 84 | 156 |
System Efficacy | 116 LM/W | ||
Light Color option | 5700/4000/2700K | ||
Materia | Die Cast Aluminum | ||
Wide AC input | 90-305 VAC | ||
Power Factor | 0.98 | ||
Total Harmonic Distortion | < 10% | ||
Surge protection | IEC/EN 61000-4-5 | ||
Operation temp | -30 ºC to +50 ºC | ||
IP class | 68 | ||
Rated Life | 100,000+ hrs | ||
Warranty | 5 years | ||
Certificate | ROHS CE DLC ATEX SAA PSE C-TICK | ||
These heavy-duty explosion proof LED lights are designed for hazardous locations in which vapors and gases are present.
They're Class 1 Div 2 rated for granaries, mills, mines, gas stations, airplane hangars, and environments where petrochemical vapors exist.
The waterproof explosion-proof LED lights are durably constructed with fully-sealed, vibration-resistant housings to prevent the release of sparks.
Not only will these lights increase safety, they will do so while lowering energy costs and increasing light output.
