Active Member
|
[China]
Address: Room A102, Building A, West Electronic Community No.181 South of Taibai Road, Hi-Tech Zone,Xi'an, 710061, China
Contact name:Jason
Xi'an Razorlux Optoelectronic Technology Co., Ltd. |
|
|
Each of these explosion proof lighting fixtures is classified by which areas it is best suited for.
Check out our zoning information at the bottom of the page to make sure you get the right match for the area you intended to work in.
This will ensure you get light fixtures with the reliability you need.
Ideal for Oil and gas refineries, drilling rigs, petrochemical
facilities, food
and beverage facilities, loading docks, tunnels, outdoor wall and
general
area lighting, and where flammable vapors, gases, ignitable dusts,
fibers
or flying are often present. Where extremely corrosive, wet, dusty,
hot
and/or cold conditions exist.
| ITEM NO. | RLEP-J40 | RLEP-J100 | RLEP-J200 |
| TOTAL POWER | 30w | 100w | 185w |
| Replace HPS | 150w | 300-350w | 700-1000w |
| Dimension | 200*200*270mm | 300*300*175mm | 400*400*185 |
| Weight | 4KG | 7.5KG | 12KG |
| Reflector/ wide angle | 120 | wide angle | wide angle |
| Nominal lumens | 3480lm | 11600lm | 20880lm |
| Driver Current | 350mA | ||
| # OF LEDS | 24 | 84 | 156 |
| System Efficacy | 116 LM/W | ||
| Light Color option | 5700/4000/2700K | ||
| Materia | Die Cast Aluminum | ||
| Wide AC input | 90-305 VAC | ||
| Power Factor | 0.98 | ||
| Total Harmonic Distortion | < 10% | ||
| Surge protection | IEC/EN 61000-4-5 | ||
| Operation temp | -30 ºC to +50 ºC | ||
| IP class | 68 | ||
| Rated Life | 100,000+ hrs | ||
| Warranty | 5 years | ||
| Certificate | ROHS CE DLC ATEX SAA PSE C-TICK | ||
1. UL TUV CB EMC CE certified MW
HLG series power driver, IP67 protective level, 7 years warranty.
2. The integration of reflective optical design,install directly in
the light body,
make the light more focus and comfortable for eyes.
3. High pressure die casting alloy aluminum housing, create through
high pressure(1600
ton) in one piece,high explosion proof level and IP68 waterproof
protection.
4. LED chip with 2.0mm thick Aluminum PCB board installed directly
onto Aluminum Shell. As a result,
the whole lamp is integrated as a radiator for the LED chips.
Besides,the distance of LEDS are good
enough for spreading heat, to ensure long lifespan, and with
special circuit design, each LED chip
won’t affect the others when fail to work, so the lamp will keep
working even if some LED chips stopped.
