Waterproof 3.7V IPX6 USB LED Glare Flashlight For Protection hunting

Waterproof 3.7V IPX6 USB LED Glare Flashlight For Protection hunting

IP66 waterproof Tactical Flashlight LED Flashlights for Camping

Battery capacity display, telescopic zoom
Micro USB for USB computer, USB car, USB charging plug, charging flashlight
Built with rugged aero grade HAIII hard alloy military grade aluminum alloy
Water resistant according to IPX-6, water resistant, can be used in rainy conditions, but cannot be put in water
Suitable for work, hunting, climbing, fishing, camping and outdoor activities, etc.

FEATURES:

• Springs at bezel and tail end resist shock and drop damages.

• Reverse Polarity Protection eliminates damage from incorrect battery orientation.

• Aero-space Aluminum alloy body with CNC machining; Mil-spec hard anodizing (HA III); lightweight yet robust construction.

• Stainless bezel ring offers protection for crucial components.

• One-piece integrated head bezel design for high efficiency heat dissipation.

• Hardened glass lens with scratch resistant AR coating.

Performance characteristics

◆ Small size, light weight, beautiful appearance, easy to carry.

◆ The waterproof performance is good, reaching IP66, and it can be used up to 1 meter underwater.

◆ The shell is made of special alloy material and anti-static surface treatment, anti-static, anti-strong impact.

◆ The light source adopts imported ultra-high-brightness LED light source, with a life of up to 100,000 hours, and there is no need to replace the bulb during use.

◆ The power supply adopts imported industrial lithium-ion battery, which has no memory effect, can be recharged repeatedly, and has a low self-discharge rate.

◆ Three levels of light: working light, strong light, and flashing. Using smart chip to control the switch, strong
and weak light can be switched arbitrarily, the continuous working time of
strong light is more than 10 hours, and the continuous working time of working
light is more than 16 hours.

◆ The lamps have overcharge, overdischarge and short circuit protection functions.

Protection level

IP66 Explosion-proof mark:ExibllCT6 Anti-corrosion grade:WF2

Instructions

◆ When in use, press the black button on the barrel body, the working light is bright, press again to convert to strong light, press again to flash, and press again to turn off.

◆ The tail of the torch is a charging socket. When charging, you only need to insert the output plug of the charger into the charging socket.

◆ The charger has a built-in charging protection device. When the charger input terminal is connected to the power supply and no load is not charged, the indicator color is green; when the charger output terminal is inserted into the torch charging socket, the indicator color changes to red, indicating that normal charging starts; When the battery is fully charged, the indicator light turns green again.

◆ After a full charge, it can be used at any time within 1 year; if it is left unused for a long time, it is better to recharge it for about 4 hours every six months.

◆ During use, when the battery power is about to run out, the brightness of the flashlight will decrease sharply. At this time, stop and charge or replace with a spare battery.

◆  Charging or disassembling the structure of the flashlight must be carried out in a safe place.

◆ Charge it in time after each use.

Caution

◆ When carrying or transporting, make sure that the button switch in
the middle of the lamp is protected from foreign objects to prevent the lamp
from igniting and power consumption.

◆ When charging or continuously discharging in a place with a high ambient temperature, the surface of the
flashlight heats up slightly, which is a normal phenomenon.

◆ Wipe the surface with a rag after use in a corrosive environment.