Active Member
|
[China]
Address: 9E, South Block, Baihui building, 3019 Sungang East Road, Luohu District, Shenzhen
Contact name:Liu
Shenzhen Everbright Lighting Technology Co., Ltd |
|
|
Double Sided Barricade IP65 Road Safety Lights With Non Memory Lithium Battery
Double Sided Barricade Red Warning Light Rechargeable Road Safety Flash Led For Railway Construction
Red Flashing Lamp with Double Face
Rechargeable LED Red Flash Lamp
station light
direction light
Position Light Signal
Position Indicator
expandable direction light
Double directional light
double side directional light
ADVANTAGE
1. Foldable double sides directional light
2. Rechargeable
3. With magnet base
4. IP 65
| 1 | Rated voltage | V | 3.7 | ||
| 2 | Rated power | W | 1 | ||
| 3 | Rated capacity | Ah | 2.2 | ||
| 4 | Continuous working time | Long bright | H | ＞10 | |
| Slow flash | ＞48 | ||||
| Flash | ＞12 | ||||
| 5 | The average service life of the light source | h | ≥10万 | ||
| 6 | Charging time | h | 4 | ||
| 7 | Battery life | cycle | 1000 | ||
| 8 | appearance | Length | mm | 88×77×270 | |
| Size | Short | mm | 88×77×160 | ||
| 9 | weight | length | g | 550 | |
| Short | 500 | ||||
1. We will provide the free service on 24 hours.
2. We have an experienced foreign trade team,and can provide the professional service.
3. We have several sets of production equipments,can make delivery in time.
4. We have a complete QC system,and supervise the quality on 24 hours.
5. We are factory ,and can provide the cheap price for you.
Performance characteristics:
◆ High-energy non-memory lithium battery, large capacity, low
self-discharge rate, excellent charge and discharge protection
circuit design, safety and environmental protection, long life.
◆ It can be used for hand-held mobile use, and it can also be used
magnetically attached to the surface of a metal body or buckled on
a thin wall for fixed use
◆ The light source adopts the international top brand LED light
source, which can send out a long light or stroboscopic warning,
signal or display direction in two opposite directions at the same
time, and the maximum visible distance in one direction is 1500
meters.
◆ Good sealing, strong waterproof performance, can work normally in
various harsh environments and climatic conditions in the field;
the protection level is up to IP66. The shell is made of
high-hardness aluminum alloy by precision CNC machining, and the
surface is anodized, which can withstand strong forces. Collision
and shock.
◆ Beautiful appearance. The structure is light and handy, and it
can also be magnetically attached to the metal surface.
Instructions:
◆ According to the needs of on-site use, determine the fixing method of the lamp. Generally, the lamp has the following methods of use: table placement, handheld, magnetic adsorption, etc.
◆ When in use, press the switch button under the lamp cap with your finger, press the first time, the light will stay on; press the second time, the light will flash slowly; press the third time, the light will go out; cycle in turn. In any state, long press for 3 seconds and the light flashes quickly, press again and the light goes out.
◆ When charging, insert the output plug of the charger into the charging socket under the lamp head to charge. The charger has a built-in charging protection device. When the charger is connected to the power supply and not charging, the indicator light is green. When the lamp is connected to start charging, The red indicator light indicates normal charging. When the charging indicator turns green, the battery is fully charged.
◆ Charge in time after each use to ensure that the battery is always fully charged. After a charge, it can be used at any time within 6 months. If it is left unused for a long time, it should be fully charged every six months.
Application:
Road Safety Lights for railway, shipping, traffic management and special dangerous places and other scenes for mobile or fixed signal indications, warning signs, orientation indications and signal communication.
