Active Member
|
[China]
Address: 9E, South Block, Baihui building, 3019 Sungang East Road, Luohu District, Shenzhen
Contact name:Liu
Shenzhen Everbright Lighting Technology Co., Ltd |
|
|
Rechargeable 32G LED Camera Flashlight IP66 Military Grade Torch
Mini Hunting Rechargeable Led Torch Light Linternas Camera Flash Light Tactical Led Flashlights
Police equipment – LED flashlight torch camera video recorder, available for video recording, audio recording & photo snapping, application in safety patrol, examination, information & data collecting.
New innovative LED Flashlight Camcorder with LCD Screen provided with focus & diffusion lights which make user to choose best expected distance.
| Rated voltage | V | 3.7 | |
| Rated capacity | mAh | 6800 | |
| LED | rated power | W | 1 |
| Average service life | h | 100000 | |
| Color temperature | K | 5500 | |
| Continuous working time | Spotlight | h | ≥14 |
| Floodlight | ≥14 | ||
| Red signal light | ≥48 | ||
| Green signal light | ≥48 | ||
| Charging time | ≤6 | ||
| Shooting time | flood light state | ≥7 | |
| Do not turn on the light (cyclic video recording) | ≥13 | ||
| Flood light state + open screen | ≥6 | ||
| Viewing angle | degree | 90 | |
| Camera pixel | million | 1200 | |
| Photographic image resolution | optional 4032×3024/3648×2736/3264×2448/2592×1944/2048×1536/1920×1080/1280×960/640×480 | ||
| Camera image resolution | optional 1920×1080/1280×720/848×480/640×480 | ||
| Storage space capacity | G | optional 32/64 | |
| Video file size | MB/minute | 35～100 | |
| Video format | MP4 | ||
| Data interface | Type-C(USB.3.1) | ||
| Battery life | cycle | about 1000 times | |
| Dimensions (outer diameter×length) | mm | Φ66×228 | |
| Magnetic function component | / | optional | |
| Weight | g | 435 | |
| Protection grade | IP66 | ||
Performance Features:
Safety performance
Video recording LED flashlight possess special circuit protector,
which can prevent over-charging, over-discharging , short-circuit
and extend battery life effectively.
Environmental performance
Due to the use of CREE high-power and ultra-high brightness LED
from USA as light source, it possesses the characteristics of low
power consumption, high lighting efficiency, long service life,
maintenance-free and no subsequent using cost. And its highly
efficient lithium battery is recyclable, low self-discharge and
economical and environmental protection.
Illumination performance
Flashlight camcorder spotlight and floodlight can be switchable
arbitrarily to reach the remote searchlight and short-distance
large-scope illumination.
Instructions for use:
Power on: Press and hold the power button for 3 seconds to power on, display the boot screen, enter the camera mode, and press again
Press the power button to enter the power-saving standby mode.
Shutdown: After booting, press and hold the power button for 3 seconds, the shutdown screen appears, which can shut down the system.
Turn off the screen: After powering on, when the display is on, press the "Turn off" button to turn off the screen (that is, the display is in the screen saver state).
Take a picture: After turning on the camera, in the picture mode, press the picture button to take a picture (press the up or down key to adjust the focus of the camera).
Video: After booting, the system enters the camera mode, press the "M" setting key to enter the photo browsing mode,
Press the "M" setting button again to enter the camera mode, at this time press the camera button to start recording video (press the up or down button to adjust the camera focal length);
Charging method:
1. Unscrew the tail cap of the flashlight.
2. Connect one end of the USB cable to the USB interface of the flashlight, and one end to the charger with the USB interface, and connect the charger to an external power source. During the charging process, the indicator light of the charger is red, and the indicator light of the charger changes from red to green when fully charged. When the torch is completely dead, it can be fully charged after charging for about 6 hours. Unplug the charger and screw on the tail cap.
Precautions:
1. Please use the USB cable plug correctly. Do not use brute force to avoid damage to the USB socket.
2. Tighten the tail cap in time after charging to prevent foreign objects from falling into the USB socket.
3. Please fully charge the lamp when you use it for the first time, and charge it in time after each use.
4. If only lighting or signal indication is needed, the display screen can be turned off to avoid wasting electricity.
5. When carrying or transporting, make sure that the key switch is protected from foreign objects to avoid power consumption when the lamp is turned on.
6. It is strictly forbidden to hit or throw the lamp. If you accidentally drop the lamp into the aqueous solution, take it out and wipe it clean.
7. Do not illuminate the eyes directly with the light at will, because the strong light may damage the eyes.
8. Do not disassemble the structural parts of the lamp at will, especially the internal structural parts such as batteries and seals.
9. When charging, please pay attention to the model of the charger and the specifications of the charging port.
10. It is strictly forbidden to hit, throw, puncture the battery or throw the battery into the fire to avoid danger!
