Shenzhen Everbright Lighting Technology Co., Ltd |
|
Adjustable IP66 LED Handheld Spotlight 12V T4 Explosion Proof
Original Design IP66 Best Flashlight Torch 90 Degrees Head Adjustable
It is widely used in the operation, inspection and meter reading of electric power, steel plants, petroleum, petrochemical, public security and other enterprises. Various field work sites are used for mobile lighting and emergency lighting.
1. Energy saving and environmental protection
2. Beautiful appearance
3. Long battery life
4. waterproof
5. With strobe
Light source | LED power | W | 3 |
Luminous flux | LM | 180 | |
Life | h | 100,000 | |
Battery | Rated capacity | mAh | 4400 |
Rated voltage | V | 12V | |
Charging time | h | ≤4 | |
Life | cycle | 1000 times | |
Charger | Input voltage | V | AC100~240 |
Output voltage | V | DC4.5 | |
Output current | A | 1 | |
Lighting time | h | Strong light 15h/Working light 25h | |
Effective illumination distance | m | 100 | |
Applicable temperature | ℃ | -20℃~40℃ | |
Maximum surface temperature | ℃ | ≤50℃ | |
Dimensions | mm | 217.3×103.8×87 | |
Weight (including battery) | g | 370 | |
Enclosure protection grade | IP66 | ||
Explosion-proof mark | Exib ⅡC T4 |
Performance characteristics:
Reliability: The entire product shell is made of high-strength
bulletproof plastic, and the rear shell is made of non-breakable
engineering plastic, which is resistant to strong impact,
waterproof, and corrosion resistance.
Safety: It adopts integrated isolation and explosion-proof
design, compact structure, dustproof and waterproof; with battery
protection function, it can effectively prevent the battery from
overcharging and overdischarging.
Energy saving: High-efficiency semiconductor light-emitting
technology, compared with traditional light sources, can save up to
70℅ at the same brightness.
Economical: Long-life LED, maintenance-free, no need to replace
the bulb, no follow-up use cost.
Environmental protection: high-performance lithium battery,
green, environmentally friendly, no pollution, no memory, low
self-discharge rate.
Instructions:
Turn on and off the light: Press the light button once, the
working light work mode; press the light button again, the strong
light work mode; press the light button again, the main light turns
off.
Strobe control: long press the light button for three seconds,
working in signal mode.
Initial use: Please make sure that the battery is sufficient for
more than six hours before use. Long-term storage is affected by
the self-discharge of the battery, and the control circuit protects
the battery so that the battery has no voltage. Therefore, it is a
normal phenomenon that the lamp cannot work before charging.
Charging operation:
1. The charger voltage input is 100-240V@50/60HZ, and the output is
4.5V@1A;
2. The charger has a built-in charging protection device. When the
indicator light is red, it means normal charging, and when the
indicator light turns to green, it means the battery is fully
charged;
3. Please use the matching charger, and charge it every two months
when not in use for a long time.
Precautions:
When charging or continuously discharging in a place with high
ambient temperature, the surface of the torch will heat up
slightly, which is a normal phenomenon.
caveat:
Charging or disassembling the flashlight must be done in a safe
place.
Recharge in time after each use.